MA Lighting
View more Sale Inventory
Quantity | 1 |
Condition | Good |
Location | United Kingdom |
Warranty | N/A |
Ships from outside of the United States
This MA Lighting NPU Network Processing Unit is in good working condition and comes with a flight case.
The MA NPU (Network Processing Unit) unites the calculation power in the network and offers the same performance as the grandMA2 consoles. The MA NPU offers and handles 4,096 parameters. With an easy to read touchscreen the MA NPU allows intuitive use and easy access to all the important information. 8 x DMX XLR 5-pin connectors on the rear side of the MA NPU allow a most flexible use within the network environment.
The MA NPU is the link between Ethernet and DMX controlled devices. The MA NPU adds processing power and parameters to the MA system. For decentralized DMX networks, the MA NPU converts incoming Ethernet data into DMX data. The converted data are transmitted via 8 independent DMX connectors, which can be configured as DMX inputs or outputs. Within a network, several grandMA2 consoles share the available MA NPU devices. For parameter expansion the MA NPU shall be located in a centralized position, whereas MA xPort Nodes are used to distribute and output DMX data.This allows DMX devices being used by several consoles together, and it provides a redundant mode of operation without additional components such as DMX mergers.
(1) NPU 8GB
(1) Flight Case
Solaris is proud to announce that Jerad Garza has been hired and chosen to head all European sales. Jerad Garza is a seasoned veteran in the industry, and at 35, has basically worked in the entertainment lighting and sound industries his whole life. Experience aside, Jerad brings enthusiasm, expertise, courtesy, and integri...
The New Standard in CAD ProductivityProductivity. Its a mission-critical component for any industry that creates, consumes, or manages design information. A new standard in CAD productivity began with the AutoCAD 2004 software release, giving users measurable productivity gains of up to 70 percent.*Now AutoCAD 2005 builds o...
Virtual Console software to be used with Sunlites autonomous USB-DMX512 Box which can control most any equipment that runs off of DMX512Step 1 - Setting channels !With a few clicks of the mouse button, you can set your traditional lighting channels as well as your scans, heads... The software uses the Sunlite ScanLibrary (a...
ETC (Electronic Theater Controls) has released software update v1.9.8 for it's EOS line of lighting consoles. This software release applies to the EOS, ION and Element ETC Consoles.The software can be downloaded from either the Eos-family product pages or the Downloads page, where you can also find the v1.9.8 manual supplem...