The Meyer LD-1A line driver combines functions previously accessed on the control electronics units (CEU) for externally amplified Meyer loudspeakers with new features, and locates them in a self-contained device accessible to the sound engineer during both setup and performance.
The mid-high section has two switch-activated optimized filters. The Array EQ filter minimizes the low-mid frequency rise caused by horizontal arrays of three to five MSL-4 speakers. The Lo Cut filter performs a crossover function for the mid-high output. With the Lo Cut filter out, a full-range signal is sent to the mid-high output.
The DS-2 & Sub Crossover function is intended for the DS-2P mid-bass speaker when used with the 650-P or PSW-2 subwoofers. With the DS-2 & Sub Crossover switch in, the Sub output receives frequencies below 80 Hz, and the DS-2 output receives frequencies above 80 Hz. When the DS-2P is used alone as a Subwoofer, or is not included in the system, the switch should be out, which sends a full-range signal to both outputs.
The mid-high, DS-2, and sub outputs each have a mute switch and a gain control that modifies their channel's Master gain level; the DS-2 and Sub outputs have a polarity toggle. The mute switches affect the mid-high, DS-2, or sub output only. For example, the mid-high output can be muted without affecting the loop, sub, or DS-2 outputs. The six auxiliary channels (3??8) control down-fill, frontfill, and delay systems. Auxiliary channels can also be used to divide the main system into subsystems, allowing independent signal levels for speakers directed at different audience locations. Each auxiliary channel has Lo Cut and Array EQ filters, a mute switch, and gain control. The two main and six auxiliary channels are fully independent from each other.
The LD-1A occupies two rack spaces and is constructed with a 16-gauge steel chassis and 1/8-inch rack ears. This rugged design provides protection from accidental impact, magnetic isolation from nearby devices, and EMI immunity.
Meyer Sound
Established by John and Helen Meyer in 1979, Meyer Sound has been at the forefront of innovation in audio engineering for over two decades. From the outset, Meyer Sound looked beyond loudspeaker cabinet design to create totally integrated, systems-comprehensive solutions that encompass transducer design, signal processing, power amplification and even electroacoustic measurement systems. As a result, Meyer Sound's engineering teams have earned an enviable reputation for developing unique, innovative solutions to some of the most difficult problems confronting audio professionals.
In fact, it is fundamental to John Meyer's philosophy that no component of a system should be compromised in order to compensate for variables "upstream" or "downstream." Instead, the entire system should be conceived, designed, tested, confirmed and manufactured as a whole to provide the optimum blend of audio fidelity, utility and long-term reliability.
Used Amp Rack Units
Find used audio amps and amplifiers by top manufacturers such as Lab Gruppen, Crown, Crest, Powersoft and more. All products come with warranties and are tested before shipping to you.
Solaris sells and buys secondhand and used amplifiers for installations, concerts, churches, events and all types of entertainment production. If you do not find what you are looking for give us a call and we will quickly find it for you.
LD-1A - Meyer Sound line driver. Used on corporate events.
LD-1A - Used on various rentals. Will ship in protective cardboard.
LD-1A - Corporate Use. No Case. 7 Day Warranty.
