CONTROL FEATURES
USITT DMX-512 (16-bit resolution)
15 DMX channels
4 Digit Blue L.E.D. Display
3 pin XLR serial input/output
SPECIAL DMX-CONTROL FEATURES
16 pan/tilt pre programed movements via DMX
Built-in Programs via DMX
Pan/Tilt/Gobo/Color & Prism set to Sound Active mode via DMX
STAND-ALONE FEATURES
Sound activated built in programs
Sensitivity knob
Linkable up to 16 units
Self Test & Stand Alone settings
Built in Microphone with sensitivity knob
OPTICAL SYSTEM
High Output Luminous-Efficiency parabolic mirror
Glass Dichroic reflector
8 - 22 Motorized zoom
150mm Fresnel Lens
Lamp: Osram HTI575/DE (575W, 5600K, 500hrs)
COLOR
CMY Gradual Color Mixing
9 Dichroic Colors + White + UV
Continuous Color Scroll
SHUTTER/DIMMER
Mechanical Dimming 0-100%
Mechanical High Speed shutter & Pulse Effect
PAN/TILT
Fine Pan & Tilt (16 bit resolution)
Automatic Pan / Tilt position correction
Maximum Pan movement 540 in 2.0s / 16 bit
Maximum Tilt movement 280 in 1.1s / 16 bit
EFFECTS
180 Beam Shaper
Frost Filter
RIGGING
2 x 1/4 turn fastener brackets
2 x Wing Mounting plates
1 x Safety Cable hole
DIMENSIONS & WEIGHT
26L x 12W x 10H
42 lbs (Power Wash 575 E)
Power Supply
Fuse: 10A
Electronic Ballast
Voltage: 90-240V 50-60Hz
Power Consumption: 700VA
Elation
Elation Professional - Professional Lighting & Entertainment Products and Accessories!
Used Moving Lights
Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting.
Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator.
Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators.
Moving lights are hooked up to a lighting control console and send data to it in one of three ways ?? through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard).
So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the ??personality? of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them ??live?, if they have the experience to do so.
