Used Vista E2 Vista

Jands have been designing, building and operating lighting equipment since we made our first dimmer in 1970. Since then, our products have become a standard feature of lighting rigs the world over.

Whatever country you’re in, ask an industry professional about Jands products and you’ll get the same response: ‘reliable, good value, solid and dependable, go-anywhere do-anything, noise-free, just better.’

But we don’t just offer our own lighting equipment, we’ve also identified the best products available from other manufacturers. This is why we can give you the best...

Wings and processors are used to extend the capabilities of lighting control consoles. Wings usually add faders, bump buttons, displays, and other functions to the console while processors consolidate. Used Vista E2. . Used Vista E2. ...

Preset Boards - Preset boards are the most basic lighting consoles - and also the most prevalent in smaller installations. They consist of two identical fader banks, called 'scenes.' The faders (control slides) on th. Used . ese scenes can be manually adjusted. Each scene has the same number of channels which control the same dimmers, but only one is live at a time, so the console operator can build a scene, then. Used . fade to it. These scenes are often referred to as A-scenes and B-scenes, and a cross-fader is used to fade between the A and B scene.

Generally, a preset board operator has a cue sheet for each s...

Generators - Generators are used to provide power where power is otherwise not available, like in out door arenas or remote locations, or when not enough power is available at a particular location. . Used . . Used . ...

Watt - An international system for the measurement of the amount of power used by a device, usually electrical in nature, equal to one joule per second or one ampere of current flowing at one volt. The watt. Used . is named after James Watt for his contributions to the development of the steam engine and in turn its contribution to electrical power.. Used . ...

Stepper Motor - A stepper motor is a type of electric motor that is used when something has to be positioned very precisely or rotated by an exact angle.

In a stepper motor, an internal rotor containing. Used . permanent magnets is controlled by a set of stationary electromagnets that are switched electronically. Hence, it is a cross between a DC electric motor and a solenoid. Stepper motors do not. Used . use brushes and commutators.

Stepper motors have a fixed number of magnetic poles that determine the number of steps per revolution. Most common stepper motors have 200 full steps/revolution, mea

Club Systems - A club system is an all in one audio or lighting set up designed for permanent installation in a nightclub or similar venue. Used . . Used . ...