Shotlight Wash in mint condition. Previously used in demos.
Used on various demos. Cleaned and maintained by in house technicians.
(1) Alpha Shotlight Wash
(1) PowerCon Connector with Cable (open end)
(1) Installed Lamp
(1) Omega Adapter with (2) Camlock
Shotlight Wash is a totally new kind of projector that combines an extraordinary 1500W discharge lamp washlight and a 3000W Xenon lamp Strobe in just one device. The two wash/Strobe functions are perfectly integrated and can be operator-controlled with either simultaneous or separate operation and Special Effects. The Strobe function is provided by two semi-circular Xenon lamps working independently, i.e. they can flash together or separately, at different frequencies.
1500 W Lok-it discharge lamp
Optical unit with extremely high luminous efficiency
Power may be set to 1500 or 1200 W
11- 74 electronic zoom
CMY colour system + 2 colour wheels (6+6) + linear Golden CTO
Indexable and rotating ovalizing filter
diamond effect filter
0-100% hybrid Dimmer (electronic + mechanical)
Three-phase pan/tilt motor for perfectly silent operation
High performance electronics and firmware
Modular construction for easy maintenance
2 special, curved, pulsed Xenon lamps, 1500 W each Lamp life: 500 hours
Special shape mirror reflector
Each lamp is individually operated
0-100% intensity control with blinding effect
Flash rate 0-16 Hz
Automatic over-temperature safety
Automatic safety black-out in case of unstable frequency
Pre-set Strobe effects and Strobe/wash effects
Manufacturer of moving lights, effects, and image projectors.
Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting. Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator. Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators. Moving lights are hooked up to a lighting control console and send data to it in one of three ways â?? through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard). So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the â??personalityâ? of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them â??liveâ?, if they have the experience to do so.