High quality Long-Throw 45mm sliders are used for better resolution.
The GQ600 also provides excellent noise anddistortion performance, with a flat noise figure of better than-98dBm.
A shelving H.F. Trim section is provided, with adjustable gain and frequency allowing fast adjustments to be made to overall high frequency response. This obviates the need for system re-voicing when, for example, changes in humidity or audience size occur.
A sweepable high-pass filter offers turnover frequencies of 10Hz to 150Hz and a fixed frequency low-pass filter is also provided for increased H.F. driver protection. This filter is selectable in or out of circuit via jumper links on the main circuit board.
XTA Electronics
Andrew Grayland and John Austin former R&D manager and one of the Technical Directors of Klark Teknik started XTA in 1992. Having overseen many of the benchmark products produced by KT, both Andrew and John felt that DSP (digital signal processing) technology could find a home at the heart of PA systems. At this time DSP was often disregarded because of its audio quality, but Andrew and John felt with the right algorithms and using 32-bit processing coefficients instead of 24-bit - what the majority of DSP designs were using - digital equipment could be designed that would sound very pure and clear.
Used Equalizers
Equalizers are used in sound recording to equalize the balance between an electronic signalâ??s frequency components, by boosting or cutting the energy of specified frequency bands. Audio equalization is most widely used in sound recording, although it has many other applications beside that of the recording studio.
There are a number of different types of Equalizers used in music recording. For example, a simple bass control (or low shelf), is able to adjust the gain of low frequency audio signals, without impacting on other frequencies. High self Equalizers (like a treble) on the other hand, are used to adjust high frequency audio signals only.
Parametric Equalizers offers a far greater range of audio equalization functions however. These types of Equalizers are able to make three specific adjustments, something that makes them incredibly versatile. They can be used first of all to adjust the center frequency, and then they can be used to adjust the Q Factor in order to determine how sharp the bandwidth is. Finally, they can also be used to adjust the gain control in order to determine how much a frequency is boosted or cut in relation to frequencies above or below the selected center frequency range.
A Graphic Dynamic Equalizer is similar to a Parametric Equalizer, except that these Equalizers are designed to be much more user-friendly. However, they are also less flexible than Parametric Equalizers. Graphic Equalizers employ a bank of filters to cover as many as 30 different frequency bands in the audio spectrum, depending on the model. The center frequency and Q Factor on Graphic Equalizers is fixed, but the level of these can be adjusted.
GQ600 - Used on an installation. Comes with a 15 day warranty.
