Buy Used VL3000 Spot by Vari-Lite

Contact a Sales Specialist about used VL3000 Spot for sale.

VL3000 Spot Moving Lights

..., a beam size iris and separate dimmer and ultra-fast stRobe mechanisms. A standard pallet of gobos, effects and colors is provided with the unit. Custom gobos, effects and color are available.

An upper enclosure houses the control electronics as well as the arc Power Supply for the 1200 watt short arc lamp. The arc Power Supply is power factor corrected for efficient Power Distribution.

The VL3000 Spot luminaire can be controlled from a wide variety of DMX512 consoles.

The luminaire is the same size as the VL3000 Wash luminaire, providing a consistent hang configuration and appearance no matter which luminaire type is required.

Vari-Lite Moving Lights

A "technical creative soul" has kept Vari-Lite at the forefront of the automated lighting industry since 1981. The company is founded on the belief that creative engineering can join with creative lighting to bring a new dimension to any performance or presentation. That notion first took root when Rusty Brutsché and Jack Maxson founded Showco in 1970. Innovation made Showco the premier sound and lighting equipment rental firm for the concert touring industry. A decade following Showco's initial success, company officials found themselves working on another technical leap, this time within the field of automated lighting. Until the 1980s, stage lighting systems for concerts and theater productions were bulky with numerous fixtures (a typical rock concert usually required up to 3,000 separate lights). Each light had to be manually focused and colored using celluloid gel material placed in front of each lighting fixture. To achieve color changes, the lighting fixtures had to be turned on and off or dimmed using electronic dimmers controlled by a computer lighting console. Throughout the late '70s, engineers worked to develop a color changer for a lighting fixture. Finally, they arrived at a solution: forget the "add-on" schemes, and concentrate on using internal dichroic coated glass filters and metal halide bulbs. The dichroic filters could be used to change colors almost instantaneously and create saturated colors not capable from the gel filters. That might have been the extent of their advancement if for a barbecue lunch in the fall of 1980. At that gathering, the idea of adding two extra motors to the fixture to actually make the light move was conceived. This "eureka" moment facilitated an all-out building effort for a fully automated lighting system that resulted in a prototype in December 1980. Shortly thereafter, the engineering team flew to London to show the prototype automated light (named "VL Zero") to longtime Showco client, Genesis. The British band had long been at the forefront of cutting-edge performance art technology, and was in rehearsal for an upcoming tour. At an English countryside studio, the new luminaire made its debut on the side of a 500-year-old barn. The prototype light had been programmed to enact two simple cues. The first reaction from the presentation came from band member Mike Rutherford: "I expected the color change, but by jove, I didn't know it was going to move." It was enough to convince Genesis to immediately invest in developing this new technology. Genesis wowed the audience with the first VARI*LITE® Series 100™ system consisting of 50 VL1™ luminaires and a computerized control console on the opening night of their "Abacab" tour on September 25, 1981 in a bullring in Barcelona, Spain. That rural demonstration was the "Genesis" of a new company - Vari-Lite, coined from a suggestion by Genesis manager Tony Smith. The new system was developed, complete with a programmable console that enabled lighting designers to create lighting effects that electrified the lighting industry and began a revolution that continues to this day. The dichroic color changing system allowed for up to 60 preselected colors to be changed in less than a tenth of a second and the computer control of the color change, dimming and movement of the light beams created stunning visual effects. The original VARI*LITE system was patented in 1983, and Vari-Lite has received numerous other U.S. and international patents on automated lighting technology as it has continued to innovate and develop the technology. Inspired by the magic of moving light and changing color, Vari-Lite set about creating complete lighting systems that add subtle nuance or brilliant spectacle to any event. The company offers designers the ultimate tool for creating lighting moments to remember. Since the beginning, Vari-Lite has led the world in automated lighting technology; developing pioneering products with an unrivaled reputation. Today, lighting professionals in theatre, television, concerts, motion pictures, corporate shows and advertising, look to Vari-Lite for inspiration and support for their productions.

Recording - Sound or audio recording is the electrical or mechanical encoding of sound waves and audio signals, usually voice or music for the purpose of reproducing the sounds at a later time. There are two basi. Used . c types of recording, analog in which the signal is variable and continuous, and digital in which the signal is first converted into a binary language.. Used . ...

Mixers - A mixer is an electronic device for combining or "mixing" audio signals by routing and changing the level, tone, and/or dynamics of the audio signals. A mixer can mix analog or digital signals depend. Used . ing on the type of mixer. The modified signals are then combined to produce a unified signal output. Mixers can vary in size and function ranging from small format having a few inputs for a . Used . DJ to large format having dozens of inputs for studio recording....

Strip Light - Strip lights, also known as Cyclorama (Cyc) lights are long housings typically containing multiple lamps arranged along the length of the instrument and emitting light perpendicular to its length. Lam. Used . ps are often covered with individual gels of multiple c . Used . ...

XLR - A type of rugged multipin metallic connector for sound and lighting equipment generally having 3 pins for audio applications and 5 pins for DMX lighting. XLR plugs are very effective at reducing data. Used . and noise errors because a comparison is made between the signals carried by two of data cables, canceling out any differences. This relationship has given rise to the misnomer that XLR sta. Used . nds for eXternal Live Return. However, these connectors, sometimes called Cannons after the original manufacturer were originally called the Cannon X series, later versions added a Latch making the Cannon XL ...

LED - An LED or light emitting diode is simply a tiny light bulb that fits into an electrical circuit. However, unlike ordinary bulbs, LEDs don't have a filament that will burn out and generate very little . Used . heat. They are illuminated by the movement of electrons in a semiconductor material and last as long as a standard transistor.. Used . ...

Moving Lights

Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting. Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator. Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators. Moving lights are hooked up to a lighting control console and send data to it in one of three ways – through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard). So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the “personality” of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them “live”, if they have the experience to do so.