Buy Used Transporter Module (CC2-TP) by Meyer Sound

Contact a Sales Specialist about used Transporter Module (CC2-TP) for sale.

Transporter Module (CC2-TP) Lighting Consoles

The Transporter module is designed to show the active cue name and number, the standby cue name and number, provide controls to execute the standby cue (GO), select and position the cue list, and to directly execute and update assigned cues. The Transporter module also includes controls and displays for the overall operation of the system.
These global controls include Included are two buttons labeled 'A' and 'B'.

Meyer Sound Lighting Consoles

Established by John and Helen Meyer in 1979, Meyer Sound has been at the forefront of innovation in audio engineering for over two decades. From the outset, Meyer Sound looked beyond loudspeaker cabinet design to create totally integrated, systems-comprehensive solutions that encompass transducer design, signal processing, power amplification and even electroacoustic measurement systems. As a result, Meyer Sound's engineering teams have earned an enviable reputation for developing unique, innovative solutions to some of the most difficult problems confronting audio professionals. In fact, it is fundamental to John Meyer's philosophy that no component of a system should be compromised in order to compensate for variables "upstream" or "downstream." Instead, the entire system should be conceived, designed, tested, confirmed and manufactured as a whole to provide the optimum blend of audio fidelity, utility and long-term reliability.

Intensity - Measured in both lux and lumens. For any given luminaire (lighting instrument or fixture), this depends upon the power of the bulb, the design of the instrument (and its corresponding efficiency), the. Used . presence or absence of color gels or gobos, distance from the area to be lit, the color and subtance to be lit, and the neuro-optics of the total scene (that is, the relative contrasts to ot. Used . her regions of illumination). ...

Advanced Control Network - A new protocol designed to improve upon on the exisiting known limitations of the DMX512 protocol. It was developed by the ESTA (The Entertainment Services and Technology Association).

T. Used . he Advanced Control Network (ACN) is intended to provide the next generation standard for the distribution of data in lighting control networks.
ACN needs to do much more than just supe. Used . rcede DMX. Ideally, ACN will unify lighting control networking, allowing a single network to carry many different kinds of lighting-related data and to connect equipment from different manufacturers. ACN is no

Backlight - Light that comes from the upstage, behind all actors and scenery. It helps to separate them from the back drop.

Light coming from upstage, behind scenery or actors, to sculpt and separat. Used . e them from the background. Used . ...

Hertz - A unit of measure for frequency generally applied to waveforms, one Hertz is equal to one cycle in one second. It is abbreviated Hz so that 100 Hz would be 100 cycles per second. However, the unit m. Used . ay be applied to periodic events other than waveforms like the second hand on a clock, which would cycle at 1 Hz, or a human heart that may beat at 1.2 Hz. Named after the German physicist H. Used . einrich Rudolf Hertz, the name was established in 1930, but did not replace the term cycles per second until the 1970s.

...

Alternating Current - An alternating current (AC) is an electrical current where the magnitude and direction of the current varies cyclically, as opposed to direct current, where the direction of the current stays constan. Used . t. The usual waveform of an AC power circuit is a sine wave, as this results in the most efficient transmission of energy. However in certain applications different waveforms are used, such a. Used . s triangular or square waves.

Used generically, AC refers to the form in which electricity is delivered to businesses and residences. However, audio and radio signals carried on electrical wire ar

Lighting Consoles

Lighting consoles are electronic devices for controlling multiple lights simultaneously from one point. Dimmers for controlling lighting intensity, automated lighting, fog machines and hazers are some of the special effects lighting devices controlled by a lighting board or lighting desk (other terms for lighting consoles). An electronic control protocol is used by lighting consoles to communicate with other devices in the lighting system. Some of these are DMX512, ACN and DMX-512-A. New protocols are being introduced as more sophisticated lighting systems become available. In the entertainment industry, where theatrical lighting design is mostly used, lighting consoles are usually found in the control booth, auditorium or the foyer. For this application, the most common protocol is DMX512. Lighting consoles are available in different sizes and complexities. A preset board, a conventional console for basic lighting systems, is used mostly for small setups. However, DJs may complement it with more advanced hybrid consoles. A moving light controller works with dimmers for controlling ordinary lighting. It also provides additional controls for automated stage lighting (also called intelligent lighting) to produce very complex lighting effects. Other types of lighting consoles include memory consoles, personal-control based controllers, and remote focus unit. The light board operator (also called the light op or board op) is the person who operates the lighting console. Depending on the scale and type of production, he can be the lighting designer or the stage manager. He or she is responsible for conventional or automated lighting fixtures as well as controlling video.