Buy Used TLM103 by Neumann

Contact a Sales Specialist about used TLM103 for sale.

TLM103 Microphones

...es extraordinary attenuation of signals from the rear.

The TLM 103 is available in satin nickel and matte black. Delivery includes an SG 1 metal swivel mount and a wooden jeweler's box.

Neumann Microphones

Neumann It is difficult to imagine a professional audio studio without a Neumann microphone. For decades, Neumann has been regarded worldwide as the standard-setting, leading manufacturer of studio microphones. Many products introduced in the history of the company have become milestones of professional audio technology. It is no accident that when listing their equipment, audio studios almost always put Neumann microphones at the top of the list – they are a recognized sign of a highly professional operation.

Bump Button - A lighting console button that performs on action when pressed and another when released. This is a lighting console term.. Used . . Used . ...

Alternating Current - An alternating current (AC) is an electrical current where the magnitude and direction of the current varies cyclically, as opposed to direct current, where the direction of the current stays constan. Used . t. The usual waveform of an AC power circuit is a sine wave, as this results in the most efficient transmission of energy. However in certain applications different waveforms are used, such a. Used . s triangular or square waves.

Used generically, AC refers to the form in which electricity is delivered to businesses and residences. However, audio and radio signals carried on electrical wire ar

Adaptor - A connector allowing more than 2 electrical devices to be connected to a single power source. These connections are normally in parallel (each device is given the same voltage levels), but current is . Used . divided between them. Also known as a "Twofer".

3-way splitters are known as "Threefers".. Used . ...

Amp Processor - An amp-processor is an amplifier that has other audio processing capabilities like compression or equalization and are often used in PA systems or to amplify mics or musical instruments. . Used . . Used . ...

Limelight - An early type of stage light in which an intense illumination is created when an oxyhydrogen flame is directed at a cylinder of lime, also called calcium oxide, which can be raised to white incandesce. Used . nce heat without melting to producing brilliant illumination. The limelight effect was discovered early in the nineteenth century by Goldsworthy Gurney. A Scottish engineer, Thomas Drummond. Used . , realized that the light would be useful for surveying and built a working version in 1826. Therefore, the light is sometimes known as the Drummond Light. The Limelights first theatrical use was in 1837 at ...

Microphones

Microphones are, along with speakers, the most essential component of any communication system. Basically, microphones are a type of acoustic-to-electric transducer, which is able to deliver sound to a remote receiver either through a cable, or more commonly nowadays, wirelessly, by converting the sound input into an electrical signal. Today, microphones are used for numerous different applications. Microphones can be found inside our telephones, radios, computers, hearing aids etc, and then there’s the stage mic, an essential item for any stage or television performer. A modern mic can actually use a range of techniques to record sound and convert it into an electrical signal that the receiver can convert into sound. One of the most common types of microphone, the dynamic microphone, uses electromagnetic induction. Dynamic mics are actually very simple in design and have few moving parts, which is one of the reasons they are so popular, as this feature makes them a lot more rugged than other types, such as the condenser microphone, which are able to record a wider sound frequency yet are far more fragile. Dynamic microphones are ideal for recording the sound produced by loud guitars, drums and amps, thanks to their ability to withstand high SPLs. However, this design incorporates a wire coil and thick diaphragm which makes them unable to pick up the highest sound frequencies. When the ability to pick up higher sound frequencies is required, a condenser microphone is the preferred option for musicians and technicians alike. Condenser microphones work differently to dynamic microphones, as they use capacitance rather than electromagnetic induction to pick up audio. The downside is that this system requires more vulnerable parts to be used, and so these mics can be damaged fairly easily. Other types of microphone are also available for specialist applications, including the wireless microphone, electret microphones, laser microphones and fiber optic microphones.