Buy Used SSDL-6064 by Irradiant

Contact a Sales Specialist about used SSDL-6064 for sale.

SSDL-6064 LED Par

This Irradiant strip light includes three pixel bars, with 18 RGB LEDs per pixel. Units are practically new. Control modes include DMX (12 channels), Display Pane, Auto, Pix Controller, Sount Active, Stand Alone, and Linking. IP Rating: IP65; Beam Angle: 90/120 degrees.

Irradiant LED Par

Irradiant® is leading manufacturer of cutting edge entertainment and architectural lighting products and much more. Our products are manufactured to the highest level of quality to achieve the best value for the best price. In the realm of decorative lighting, the name Irradiant® has become an established and recognized brand in the decorative and entertainment lighting industry. We are committed to fulfilling the needs of our customers with innovative design, friendly service and Total Quality Management. Our products are manufactured to quality standards such as ISO 9001, CE, ETL, UL, CUL, CETL, RoHS, WEEE, and other international standards as necessary.

Color Changers - A conventional lighting fixture with a remotely controlled colored changeable filter over the lens. There are three kinds of mechanisms used in color changers, a wheel with lens sized holes into which. Used . colored gells can be placed, multiple fixed filters that can be moved in and out of the beam to mix the colors and a scroller which uses continuous, usually dichroic, filters to mix an even . Used . greater number of colors.



...

Wings and Processors - Wings and processors are used to extend the capabilities of lighting control consoles. Wings usually add faders, bump buttons, displays, and other functions to the console while processors consolidate. Used . , alter, redirect or synchronize the signals coming to and from the console. Consoles often have wings designed specifically for use with that console, but processors are more generalized.. Used . ...

Aircraft Landing Light - A narrow beam PAR lamp (28 volt) that is used on aircraft and often adopted for PAR64 and PAR46 lamps. They are most commonly 4 lamps wired in series to attain the required voltage of the circuit as . Used . close to 120 volts. ACL lamps have a higher intensity, brightness and color temperature than the standard PAR lamp.

ACL lamps are more expensive than standard PARs and have a sho. Used . rter life.

Microphones - A microphone is a device that converts sound waves into an electrical signal. There are many different kinds of microphones, including carbon, condenser, dynamic, and ribbon microphones, all of which . Used . have serve specific needs in recording and audio production. . Used . ...

Preset Boards - Preset boards are the most basic lighting consoles - and also the most prevalent in smaller installations. They consist of two identical fader banks, called 'scenes.' The faders (control slides) on th. Used . ese scenes can be manually adjusted. Each scene has the same number of channels which control the same dimmers, but only one is live at a time, so the console operator can build a scene, then. Used . fade to it. These scenes are often referred to as A-scenes and B-scenes, and a cross-fader is used to fade between the A and B scene.

Generally, a preset board operator has a cue sheet for each s...

LED Par

The LED Par, or Parabolic Aluminized Reflector Lamp, is a specialized kind of stage lighting apparatus that are versatile enough to be used for practically any kind of application that might be required during concerts and other stage productions. The LED Par uses light-emitting diodes as opposed to traditional high-intensity discharge or halogen bulbs seen in classical stage lighting. There are three main types of LED par that are used in stage lighting. Striplights, PAR cans, which are rounded printed circuit boards on which LEDs are mounted, and moving head lights, which can be mounted on a yoke. Although the LED Par 64 can be used for almost any application, they are generally used as side lights, back lights or top lights, and also for lighting cycloramas. Two of the biggest advantages of the LED Par are that it has reduced power consumption when compared to traditional lights, and also a higher light output. Many LED pars, like the RGBW LED Par, come with green, red and blue LED bulbs, which be adjusted to achieve virtually any color spectrum, thus it is not required to have numerous different colored lights to achieve multiple different colors. One final advantage of the LED LED 1 Watt Par is that it can be directly manipulated using DMX – no extra dimmers are required for its control, as the light intensity can be adjusted from the main control panel.