Buy Used Q-10 by DB Audiotechnik

Contact a Sales Specialist about used Q-10 for sale.

Q-10 Cabinet Speakers

...ies cabinets ground stacked, or mounted on a high stand with the Q Flying bracket. When used in the upright configuration it has a very accurate 110deg horizontal constant directivity behaviour that is maintained down to approximately 800 Hz. Its wide constant directivity performance provides remarkable transparency when used in close proximity to listeners. It is also ideally suited to ambient and /or distributed sound reinforcement tasks where orientation within the sound field is critical. The Q10 cabinet is constructed from marine plywood and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill, covered with a replaceable acoustically transparent foam. The cabinet incorporates a pair of handles and mounted on the rear panel are two EP5 or NL4 connectors wired in parallel.
Amplifiers

The Q10 can be driven either by d&b's D6 or D12 dual channel power amplifiers configured for the Q10. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.

DB Audiotechnik Cabinet Speakers

d&b audiotechnik has been developing, manufacturing and distributing loudspeaker systems since 1981. The company operates internationally in the field of electroacoustics to produce high quality products for reinforcement of speech and music. Through the amalgamation of technological developments, system integration principals, quality of construction and standards of service, d&b pursues a systems approach that includes all aspects of design, development, manufacture and support. d&b's loudspeakers are used globally in rental and installation markets for events, multimedia, musicals, concert halls, theatres, opera houses, broadcast and everything from the smallest conference room to the largest stadium.

Depth of Field - While a lens focuses on a single plane of depth, there is usually an additional area in focus behind and in front of that plane. This is depth of field. Depth of field increases as the iris is closed.. Used . There is more depth of field the wider the lens and le . Used . ...

Ethernet - Ethernet (this name comes from the physical concept of ether) is a frame-based computer networking technology for local area networks (LANs). It defines wiring and signaling for the physical layer, an. Used . d frame formats and protocols for the media access control (MAC)/data link layer of the OSI model. Ethernet is mostly standardized as IEEEs 802.3. It has become the most widespread LAN techno. Used . logy in use during the 1990s to the present, and has largely replaced all other LAN standards such as token ring, FDDI, and ARCNET. ...

Controllers - A hoist or motor controller is a machine for raising and lowering personnel or gear by means of a cable for the purpose of setting the gear in place on a truss or stage.

. Used . . Used . ...

WYSIWYG - Acronym for "What You See Is What You Get," that is used in computing to describe a system where the content during editing appears very similar to the final product. Often employed in the context of . Used . software tools for lighting design and production administration or applied to TTL (through the lens) camera systems where the viewfinders have 100% film frame coverage. WYSIWYG lighting sof. Used . tware usually has fantastic 3D rendering of lighting states and direct connections to lighting consoles, enabling accurate visualisation of lighting designs. WYSIWYGs significantly increase the connection b...

Folding - A folding truss is a truss that folds for easy storage and transport.. Used . . Used . ...

Cabinet Speakers

Speaker cabinets are specially engineered units in which audio equipment such as speakers and their associated hardware are mounted into. These cabinets can be very basic affairs, little more than a wooden case with no additional features other than one port for inputting a sound cable, or they can be incredibly complex cabinets with features ranging from numerous ports and internal baffles to acoustic insulation and composite materials used in their construction. The main point of housing loud speakers and PA speakers in cabinets is not simply to make them look neat and tidy, although that is one benefit. The cabinet actually provides a useful function in preventing competing sound waves from interacting with each other and distorting the end product. This is because the diaphragm that the speaker driver uses to create the sound we hear generates sound waves both at the front and the rear, and these will be out of sync with each other, thus creating a distortion if not dealt with adequately. Other side effects include echo and reverberation, as the sound waves would reach the audience at slightly different times as they travel on different paths through the loud speakers towards them. In addition to minimizing these unwanted side effects, loud speaker’s cabinets also help to manage the vibrations which are caused by the driver frame, as well as the buildup of heat that is associated with amplifiers, driver voice coils and other moving components in PA speakers.