Buy Used PHW-575 PRO-Head Wash by FutureLight

Contact a Sales Specialist about used PHW-575 PRO-Head Wash for sale.

PHW-575 PRO-Head Wash Moving Lights

... CMY color mixing and color-wheel
StRobe effect with 1-13 flashes per second via shutter
Random stRobe effect
Control-Board with LCD-display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-Reverse, Program, Reset, lamp on/off, operating hours
Remotely switching of the lamp
Built-in demo sequence
Preprogrammed variable/random stRobe and dimmer Pulse effects
Black-out while Head moving or CMY/color/beam-shaping changing
Remotely controllable speed of PAN /TILT movement for easy programming
Remote reset function
Motorized zoom
Lightbeam with 13deg-50deg radiation angle
Mechanic dimmer
Exact positioning via 16 bit Pan/Tilt movement resolution
PAN-angle switchable between 630deg and 540deg
DMX-controlled operation or stand alone operation with Master/Slave-function
56 preprogrammed scenes in Program Run for stand alone operation
Number of scenes in Program Run can be changed individually
The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
7 built-in programs can be called up via DMX-controller
Sound-controlled via built-in microphone
For MSR 575SA/2 DE GOLD lamp
DMX-control via every standard DMX-controller

FutureLight Moving Lights

FutureLight

Amp Racks - An amp rack is any furniture, fixture, or case where multiple amplifiers are mounted in slots or grooves, generally used in touring systems because they are easy to transport.

. Used . . Used . ...

Communications - Communication gear is essentially used to relay information to different individuals or teams during a show or performance to insure everything, including audio, lighting and staging are timed correct. Used . ly and functioning properly and safely. . Used . ...

Outboard Effects - Outboard effects hardware is generally used to artificially enhanced or processes sounds or audio signals to artistically emphasize or place the content into a more appropriate signal.. Used . . Used . ...

Analog to Digital Converter - In electronics, an analog-to-digital converter (abbreviated ADC, A/D, or A to D) is a device that converts continuous signals to discrete digital numbers. Typically, an ADC converts a voltage to a di. Used . gital number. The digital to analog converter or DAC performs the reverse operation. . Used .

Roofs - A roof is part of a stage used to provide shade and protection from the weather to the performers below.. Used . . Used . ...

Moving Lights

Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting. Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator. Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators. Moving lights are hooked up to a lighting control console and send data to it in one of three ways – through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard). So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the “personality” of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them “live”, if they have the experience to do so.