Buy Used PHW-260 by FutureLight

Contact a Sales Specialist about used PHW-260 for sale.

PHW-260 Moving Lights

...Colour-wheel with additional 5 discrete dichroic filters plus white, 3200 K and 5600 K correction-filters, UV-filter, Switchable colour change (mode 1: only full colours, mode 2: colour-change at every position), Rainbow-effect with adjustable speed in both directions, Macro-function for combinations between CMY-colour mixture and colour-wheel, Frost-filter for softer beam, Beam-shape effect: wide and flat beam can steplessly be rotated by 180deg, StRobe-effect of 1-13 flash per sec., Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-Reverse, Program, Reset, lamp on/off, Software-update possible via optional accessory, Remotely switching of the lamp, Built-in demo sequence, Preprogrammed variable/random stRobe and dimmer Pulse effects, Black-out while Head moving or colour changing, Remotely controllable speed of PAN /TILT movement for easy programming, Remote reset function, Silent fans cooling; remotely controllable speed of fans, Motorized zoom, Mechanic dimmer, Exact positioning via 16 bit Pan/Tilt movement resolution, Lamp already installed and adjusted from factory, DMX-control via every standard DMX-controller, incl. lamp, dimensions: 370 mm x 420 mm x 470 mm, weight: 24 kg,

FutureLight Moving Lights

FutureLight

Protocol - In computing, a protocol is a convention or standard that controls or enables the connection, communication, and data transfer between two computing endpoints. In its simplest form, a protocol can be . Used . defined as the rules governing the syntax, semantics, and synchronization of communication. Protocols may be implemented by hardware, software, or a combination of the two. At the lowest leve. Used . l, a protocol defines the behavior of a hardware connection.

Protocols should be distinguished from technical standards, which variously specify how to build a computer or related hardware device,...

Video - Video is the technology of electromagnetically recording, processing, transmitting, and reconstructing a sequence of images that represent scenes in motion.

. Used . . Used . ...

Delay - Delay is an audio effect which records a signal or sound and then plays it back after a period of time. The delayed signal may be played back multiple times or looped back into the recording again to . Used . create the sound of a repeating decaying echo. Unlike reverb, which uses reflected sound to produce many echos, delay has greater control over the number of times the sound is echoed. . Used . ...

Power Distro - A power distro send power evenly and appropriately to various staging and rigging equipment to insure there is enough power to properly run the various equipment.. Used . . Used . ...

Monitor - Monitor can refer to a speaker used on stage, usually in the shape of a wedge, to enable musicians to hear each other or a studio monitor that is designed for audio production in recording, film, tele. Used . vision and radio studios.. Used . ...

Moving Lights

Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting. Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator. Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators. Moving lights are hooked up to a lighting control console and send data to it in one of three ways – through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard). So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the “personality” of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them “live”, if they have the experience to do so.