Buy Used Monitor by D.A.S. Audio

Contact a Sales Specialist about used Monitor for sale.

Monitor Monitors

...to PA products in the early 1980s. DAS continue to build their reputation in this field today, making a lot of OEM products as well as speakers with the DAS badge.

However, DAS are not simply box manufacturers putting other people's drivers into their cabinets. The company makes its own cone loudspeaker drive units and Compression Drivers, using all the popular techniques such as edge-wound, oversized coils and so forth. They also design and make their own horns and cabinets, power amplifiers and all the associated signal-processing equipment too.

D.A.S. Audio Monitors

Today, we manufacture loudspeaker systems and components, which we supply to other manufacturers throughout the world. Power amplifiers, electronic signal processors, and accessories complete a vast array of products that address the gamut of sound reinforcement applications. Loudspeaker and system designs are developed by a staff of engineers aided by advanced computer assisted design programs. Performance testing is done with proprietary software such as Autopol, a platform for automated acquisition and processing of directivity data. A well planned industrial process, careful selection of suppliers, and the in-house production of loudspeaker components optimized for use in D.A.S. Audio sound systems empowers the company with quality levels and cost efficiency matched by only a few.

Conventional Lighting - Conventional lighting is made up of stationary lights that can be moved, but only via manual means of adjusting, or focusing the fixture with a yoke.. Used . . Used . ...

Generators - Generators are used to provide power where power is otherwise not available, like in out door arenas or remote locations, or when not enough power is available at a particular location. . Used . . Used . ...

Dimmers and Distro - Dimmers are devices used to vary the brightness of a light or stage light and are usually controlled remotely by a lighting console or controller by way of a protocol that is usually DMX. A Distro is . Used . a device that distributes power to many devices.. Used . ...

Color Changers - A conventional lighting fixture with a remotely controlled colored changeable filter over the lens. There are three kinds of mechanisms used in color changers, a wheel with lens sized holes into which. Used . colored gells can be placed, multiple fixed filters that can be moved in and out of the beam to mix the colors and a scroller which uses continuous, usually dichroic, filters to mix an even . Used . greater number of colors.



...

Ethernet - Ethernet (this name comes from the physical concept of ether) is a frame-based computer networking technology for local area networks (LANs). It defines wiring and signaling for the physical layer, an. Used . d frame formats and protocols for the media access control (MAC)/data link layer of the OSI model. Ethernet is mostly standardized as IEEEs 802.3. It has become the most widespread LAN techno. Used . logy in use during the 1990s to the present, and has largely replaced all other LAN standards such as token ring, FDDI, and ARCNET. ...

Monitors

Monitors are commonly known as “stage monitors”. Stage monitors are the speakers used on stage that are directed towards the performers so that they can hear themselves while playing. This allows them to monitor how well they are playing. Usually, the monitor speaker is needed when instruments with amplifiers are used in combination with acoustic instruments and the voice. These monitors on stage usually have built in amplifiers and equalizers. These monitors specifically highlight the vocals and the sound of the acoustic instruments so they won’t be enveloped completely by the drums or the other electronic instruments. The audio wedge, wedge monitor, stage wedge, amplifiers, equalizers and monitor mixers all comprise the stage monitor system. There are two types of monitor speakers: the floor monitors and side fill monitors. Usually speakers on stage are heavy duty and require high input power to be able to generate high volume sounds. The floor monitors are the speakers that are placed on the floor. They are compact with the angle back design. Because of its angle appearance, it is also known as “wedge”. The smaller singular speakers are called the “hot spot” monitor that is usually placed on the microphone stand so the performers can easily hear themselves. The two way heavy duty speakers have the woofer and the high frequency horn. The side fill monitors are those found at the upright side of the stage and these allow sound to be heard in places that the floor monitors cannot cover.