Buy Used MY575 by Elektralite

Contact a Sales Specialist about used MY575 for sale.

MY575 Moving Lights

Elektralite's MY575.3 further improves on the established pedigree of the MY575 family and now offers :

* Carefully balanced dual color wheels
* Removable Gobo Holder
* Quiter operation
* Greater tolerance to supply borne noise and voltage peaks
* Multi–voltage operation

Elektralite Moving Lights

Elektralite, a division of Group One Limited, designs, manufactures and markets a diverse range of lighting controllers and effects which are distributed globally through an international dealer network and within America by Group One Limited.

Preset Boards - Preset boards are the most basic lighting consoles - and also the most prevalent in smaller installations. They consist of two identical fader banks, called 'scenes.' The faders (control slides) on th. Used . ese scenes can be manually adjusted. Each scene has the same number of channels which control the same dimmers, but only one is live at a time, so the console operator can build a scene, then. Used . fade to it. These scenes are often referred to as A-scenes and B-scenes, and a cross-fader is used to fade between the A and B scene.

Generally, a preset board operator has a cue sheet for each s...

Kelvin - The kelvin (symbol: K) is the SI unit of temperature, and is one of the seven SI base units. It is defined by two facts: zero kelvins is absolute zero (when molecular motion stops), and one kelvin is . Used . the fraction 1/273.16 of the thermodynamic temperature of the triple point of water. The Celsius temperature scale is now defined in terms of the kelvin, with 0 °C corresponding to 273.15 kel. Used . vins, approximately the freezing point of water under ordinary conditions.

The kelvin is named after the British physicist and engineer William Thomson, 1st Baron Kelvin; his barony was in turn na...

Stages - A stage is a designated space for the performance of theatrical productions or other live events. Some stages are permanent structures in theaters, but often stages are temporary structures built for . Used . outdoor events and can range is size from small 20 to 30 square foot structures to very large arena sized stages assembled from many components.. Used . ...

Color - Color temperature is measured in kelvins, and gel colors are organized by several different systems maintained by the color manufacturing companies. The apparent color of a light is determined largel. Used . y by the gel color given it, but also in part by the power level the lamp is being run at and the color of material is it to light. As the percentage of full power a lamp is being run at drop. Used . s, the tungsten filament in the bulb glows orange instead of more nearly white. This is known as amber drift or amber shift. Thus a 1000-watt instrument at 50% will appear far more orange than a 500-watt instr

Angstrom - An angstrom, angström, or ångström (symbol Å) is a unit of length. It is not an SI unit. It is accepted (although discouraged) for use with the SI. It is used sometimes used expressing the size of ato. Used . ms, and lengths of chemical bonds and visible-light spectra.

The ångström is named after the Swedish physicist Anders Jonas Ångström (1814–1874), one of the founders of spectrosc. Used . opy. Besides astrophysics, Ångström was also a student of heat transfer, terrestrial magnetism, and the aurora borealis, which was so prominent for him in his northern skies. He created a spectrum chart of sol...

Moving Lights

Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting. Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator. Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators. Moving lights are hooked up to a lighting control console and send data to it in one of three ways – through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard). So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the “personality” of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them “live”, if they have the experience to do so.