Buy Used MMX Spot by Robe

Contact a Sales Specialist about used MMX Spot for sale.

MMX Spot Moving Lights

...Wheel' - 2 fully controllable contra-rotating plates that can be positioned anywhere across the light path to produce unique Visual Effects.

Robe Moving Lights

Robe Show lighting . Manfuacturer of high quality Intelligent Lighting systems and products. ROBE Lighting, Inc. Headquarters: 13807 N.W. 4th Street, Sunrise, Florida 33325 Tel.: (954) 615-9100 Fax: (954) 615-9105

Multi Effects - Multi effects applies to any outboard audio effects hardware that is capable of processing the signal through more than one effect. In modern effects hardware multi effects are more common and usuall. Used . y include many different effects by which the audio can be processed.. Used . ...

Laser - LASER is acronym for Light Amplified by Stimulated Emission of Radiation and is an optical source that emits photons in a coherent concentrated beam. There are many different kinds of LASERs producing. Used . many different colors, but red is the most common.. Used . ...

Dimmer - Dimmers are devices used to vary the voltage running to a light. By decreasing or increasing the voltage to the lamp it is possible to vary the intensity of the lamp. Changes in intensity are called “. Used . fades” and can be “fade ups” or “fade downs.” Although variable-voltage devices are used for various purposes, the term dimmer is generally associated with lighting control. Small dimmers are. Used . seen more and more in the home. These have traditionally been actuated by direct control. The advent of X-10 technology is making remote control of home dimmers possible. A digital signal is imposed on the ho...

Intelligent Lighting - Intelligent lighting is stage lighting that has automated or mechanical functions beyond traditional, stationary illumination. While intelligent lights can at times display complicated effects and fun. Used . ctions, they are only capable of performing the task set up by the programmer and are therefore sometimes referred to as obedient lighting. Intelligent lights come in many forms, but commonly. Used . are yoked moving heads or scanners and are usually controlled by DMX signals from lighting controllers or consoles. ...

Aircraft Landing Light - A narrow beam PAR lamp (28 volt) that is used on aircraft and often adopted for PAR64 and PAR46 lamps. They are most commonly 4 lamps wired in series to attain the required voltage of the circuit as . Used . close to 120 volts. ACL lamps have a higher intensity, brightness and color temperature than the standard PAR lamp.

ACL lamps are more expensive than standard PARs and have a sho. Used . rter life.

Moving Lights

Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting. Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator. Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators. Moving lights are hooked up to a lighting control console and send data to it in one of three ways – through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard). So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the “personality” of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them “live”, if they have the experience to do so.