Buy Used M-15 by Adamson Systems Engineering

Contact a Sales Specialist about used M-15 for sale.

M-15 Monitors

...uple
The M15 employs a switch which allows bi-amped or passive operation. It uses internal crossover circuitry when in
passive mode, which is automatically by-passed when in active mode.
The cabinet is loaded with a single ND-15L, a 15 inch LF driver which incorporates a lightweight long excursion
neodymium magnet, enhancing output, delivering superior powerhandling and providing consistently stable low end
frequency response.The ND-15's basket utilizes an enlarged heat sync and thermal fins which draw heat away from the
coil, lowering its operating temperature and improving thermal compression.
Constructed from Baltic birch, it is designed to
accept a multi-purpose rigging plate that allows
several different methods of flying the cabinet
(see Rigging section).
The ND-15 is the only driver with zero-axial
modes in it's entire passband. (60-800 hz) This
substantially increases the linearized mid-band
response.
Compared to traditional paper cones, the
multilayer Kevlar cone along with advanced cone
architecture, offers superior performance, zero fatigue and eliminates cone modes in the passband.

Adamson Systems Engineering Monitors

Brock Adamson's passion for sound has driven the evolution of Adamson Systems Engineering from a small speaker shop to a company invested in its own factory, with a broad engineering base and a wide range of computer controlled manufacturing machinery. Now Adamson is recognized as the most advanced manufacturer of loudspeaker systems in the industry. A versatile range of products - from the highly acclaimed Y-Axis and SpekTrix true line source arrays to the SX and MH Series of conventional loudspeakers - has equated the Adamson brand name around the world with excellence and distinction.

Laser - LASER is acronym for Light Amplified by Stimulated Emission of Radiation and is an optical source that emits photons in a coherent concentrated beam. There are many different kinds of LASERs producing. Used . many different colors, but red is the most common.. Used . ...

Bump Button - A lighting console button that performs on action when pressed and another when released. This is a lighting console term.. Used . . Used . ...

Motor - A hoist is a device used for lifting or lowering a load by means of a drum or barrel around which rope or chain wraps. It may be manually operated, electrically or pneumatically driven and may use ch. Used . ain, fiber or wire rope as its lifting medium.

A hoist normally is used for lifting (near vertical) and a winch is normally used for pulling (near horizontal). . Used .

Rigging Hardware - Rigging Hardware applies to all the pins, hooks and other pieces used to connect and hoist gear into place.. Used . . Used . ...

Color Changers - A conventional lighting fixture with a remotely controlled colored changeable filter over the lens. There are three kinds of mechanisms used in color changers, a wheel with lens sized holes into which. Used . colored gells can be placed, multiple fixed filters that can be moved in and out of the beam to mix the colors and a scroller which uses continuous, usually dichroic, filters to mix an even . Used . greater number of colors.



...

Monitors

Monitors are commonly known as “stage monitors”. Stage monitors are the speakers used on stage that are directed towards the performers so that they can hear themselves while playing. This allows them to monitor how well they are playing. Usually, the monitor speaker is needed when instruments with amplifiers are used in combination with acoustic instruments and the voice. These monitors on stage usually have built in amplifiers and equalizers. These monitors specifically highlight the vocals and the sound of the acoustic instruments so they won’t be enveloped completely by the drums or the other electronic instruments. The audio wedge, wedge monitor, stage wedge, amplifiers, equalizers and monitor mixers all comprise the stage monitor system. There are two types of monitor speakers: the floor monitors and side fill monitors. Usually speakers on stage are heavy duty and require high input power to be able to generate high volume sounds. The floor monitors are the speakers that are placed on the floor. They are compact with the angle back design. Because of its angle appearance, it is also known as “wedge”. The smaller singular speakers are called the “hot spot” monitor that is usually placed on the microphone stand so the performers can easily hear themselves. The two way heavy duty speakers have the woofer and the high frequency horn. The side fill monitors are those found at the upright side of the stage and these allow sound to be heard in places that the floor monitors cannot cover.