Buy Used Lucky Led 270 by G-Lites

Contact a Sales Specialist about used Lucky Led 270 for sale.

Lucky Led 270 LED Par

...cally or horizontally, with step motor to regulate spotting area and shooting angle of Reflection dish.

INPUT
3 pin in/out DMX 512 signal, 7 control channels.

SET UP
Automatic run, sound control and master/slave function.

POWER
Built-in Power Supply.
Electronic Ballast.
110V-240V 50Hz/60Hz.
PFC Power factor compensation.
According to various kinds of safety standards, IP20 protect grades.
Built-in over heat protection and high voltage protection.
Meet CE standard, UL standard and GB7000.15 – 2000 standard.

CONSUMPTION
Power consumption: 30 W.

DIMENSION
L 193 W 222 H 172 mm.

WEIGHT
1.64 KG.

G-Lites LED Par

Grace Lites Corporation 42245 Remington Ave. Suite B17 Temecula, California, 92590

Amp Processor - An amp-processor is an amplifier that has other audio processing capabilities like compression or equalization and are often used in PA systems or to amplify mics or musical instruments. . Used . . Used . ...

Digital Projection - A digital projection display system is a computerized display that projects an image, often a logo, on a screen, building or other architectural features like the court in a sports arena. Such devices. Used . are commonly used in presentations or as promotional devices. These displays use a very bright light to project the image, and can generally correct any curves, blurriness, and other inconsi. Used . stencies in the image....

Active - A active circuit works with an external power supply and usually at low power. A passive circuit operates directly on a signal using the power coming from the surrounding circuitry.
This is the . Used . reason why an active crossover is, for the most part, placed before amps, containing integrated circuits (and line level signal processing). On the other hand a passive crossover is placed . Used . after amplifiers where power levels are much larger . ...

Lux - The lux (symbol: lx) is the SI derived unit of illuminance or illumination. It is equal to one lumen per square metre.

The difference between the lux and the lumen is that the lux takes i. Used . nto account the area over which the luminous flux is spread. 1000 lumens, concentrated into an area of one square metre, lights up that square metre with an illuminance of 1000 lux. The same . Used . 1000 lumens, spread out over ten square metres, produces a dimmer illuminance of only 100 lux.

Achieving an illuminance of 500 lux might be possible in a home kitchen with a single fluorescent lig...

Intelligent Fixtures - Intelligent Fixtures or Moving Lights were originally implemented in 1972, but the first computer-controlled stage lighting fixtures began to gain widespread acceptance in the concert industry in the . Used . early 1980's. As the digital age progressed, the cost of these fixtures was reduced and they slowly started being used in more 'traditional' theatrical environments. Intelligent fixtures are . Used . currently used in almost all major theatrical productions.

Usually relying on compact arc lamps as a light source, these fixtures generally use stepper motors connected to varying internal devices...

LED Par

The LED Par, or Parabolic Aluminized Reflector Lamp, is a specialized kind of stage lighting apparatus that are versatile enough to be used for practically any kind of application that might be required during concerts and other stage productions. The LED Par uses light-emitting diodes as opposed to traditional high-intensity discharge or halogen bulbs seen in classical stage lighting. There are three main types of LED par that are used in stage lighting. Striplights, PAR cans, which are rounded printed circuit boards on which LEDs are mounted, and moving head lights, which can be mounted on a yoke. Although the LED Par 64 can be used for almost any application, they are generally used as side lights, back lights or top lights, and also for lighting cycloramas. Two of the biggest advantages of the LED Par are that it has reduced power consumption when compared to traditional lights, and also a higher light output. Many LED pars, like the RGBW LED Par, come with green, red and blue LED bulbs, which be adjusted to achieve virtually any color spectrum, thus it is not required to have numerous different colored lights to achieve multiple different colors. One final advantage of the LED LED 1 Watt Par is that it can be directly manipulated using DMX – no extra dimmers are required for its control, as the light intensity can be adjusted from the main control panel.