Buy Used Line Array System by Miscellaneous
Also Known As: Used line array system
Used Line Array Speakers For Sale
$21,119 USD : €16.790 EUR
Package of 4 MICA speakers. Used on various rentals. Comes with dollies and covers.
$105,160 USD : €83.607 EUR
Complete turnkey system that has been gently used on corporate events.
Contact a Sales Specialist about used Line Array System for sale.
+1.404.817.9300
Line Array System Line Array Speakers
Custom line array speaker system. Check with seller on specification.Miscellaneous Line Array Speakers
The difference between the lux and the lumen is that the lux takes i. Used . nto account the area over which the luminous flux is spread. 1000 lumens, concentrated into an area of one square metre, lights up that square metre with an illuminance of 1000 lux. The same . Used . 1000 lumens, spread out over ten square metres, produces a dimmer illuminance of only 100 lux.
Achieving an illuminance of 500 lux might be possible in a home kitchen with a single fluorescent lig...
Line Array Speakers
Line array speakers make up a loudspeaker system to create a sound source that produces an evenly distributed sound output. The driver of each line array element is close enough to the driver of the next element to create constructive interference. The resulting sound waves go farther than sound waves from traditional loudspeakers. Line array systems date back to the early days of research in acoustics. Many old town halls and public venues still have old line source boxes which were found to project voice well though they are much smaller than horn-loaded speakers. These days, line array speakers use different drivers for high-, mid- and low-frequency passbands that must be in line. Each enclosure must be set up closely to form columns composed of these drivers. To increase the frequency range and maximum sound pressure, the number of drivers per enclosure must be increased. The orientation of line array speakers may vary. Vertical arrays are excellent for focusing sound at audiences without wasting output energy on ceilings or empty air above the audience because of its very narrow vertical output with a normally-wide horizontal pattern. On the other hand, horizontal line arrays have a very narrow horizontal output with a tall vertical pattern. For hanging concert speakers which are usually part of a concert reinforcement system, enclosures are set up together using a specialized rigging hardware and they hang from a single point. These line array speakers are curved backward at the lower portion so that the sound will reach more audience. Used Line Array System For Sale
Complete concert system. Ready to go. Plug and play. Was purchased in 2009 and is still practically brand new!...
30 Day
Warranty
Line Array System News
November 15th, 2011
Sandeep Dhawan, Technical Director of Dhawan Stagecrafts Pvt. Ltd. recently purchased an Adamson Systems Engineering Y10 line array system from Solaris. Working on a tight deadline Solaris was able to use it's vast knowledge of internat...
more...
September 28th, 2011
It might've been damp and drizzly but that did little to dissuade more than 60,000 pop and opera lovers from heading down to the Great Lawn at New York's Central Park earlier this month to catch a glimpse of Andrea Bocelli's free...
more...
Popular Line Array Speakers
This 300W loudspeaker is designed for use in single and multiple configurations in permanently-installed indoor applications. The slim profile of the Panaray MA12 speaker adds an attractive design element to any installation.
The Panaray MA12 loudsp...
J8 loudspeaker
The J8 is a 3-way design housing 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated wave-shaping device. The mechanical and acoustical design enables flo...
J subwoofer
The J-SUB is an actively driven 2-way bass-reflex design housing three long excursion neodymium 18" drivers, two drivers face to the front and one driver to the rear. The cardioid dispersion pattern resulting from this approach avoids un...
J12 loudspeaker
The J12 is a 3-way design housing 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated wave-shaping device. The mechanical and acoustical design enables f...







