Buy Used LR-16 by Alcon Audio

Contact a Sales Specialist about used LR-16 for sale.

LR-16 Line Array Speakers

...gibility and throw.
The compact size, combined with the easy and accurate flying system, makes the system quick to set-up.
Special attention in the design was paid to creating a versatile (and therefore economic) system; The system can be scaled from (part of) a large-scale Long-Throw Arena system to an ultra-compact single cabinet system, with its revolvable wave-guide.
Furthermore, its lowest usable frequency is 51Hz., making the system real full-range in most applications.

The SIS pre-wiring ensures complete cable/connector compensation between the LR16 and ALC. Typical applications for the LR16 include main system for theatre, A/V, PA or front-, in- and side-fill system.

In applications where extended bass response is required, the LR16 can be combined with the LR16B bass module or a BF362 deep-sub system.

For full system performance, we recommend using the LR16 in combination with an ALC 2 (or ALC 4) amplifier/controller. Driven by the ALC, the LR16 delivers maximum sound quality with inaudible (power and excursion) protection (SDP circuit).

Alcon Audio Line Array Speakers

Lux - The lux (symbol: lx) is the SI derived unit of illuminance or illumination. It is equal to one lumen per square metre.

The difference between the lux and the lumen is that the lux takes i. Used . nto account the area over which the luminous flux is spread. 1000 lumens, concentrated into an area of one square metre, lights up that square metre with an illuminance of 1000 lux. The same . Used . 1000 lumens, spread out over ten square metres, produces a dimmer illuminance of only 100 lux.

Achieving an illuminance of 500 lux might be possible in a home kitchen with a single fluorescent lig...

LCD - A liquid crystal display is a low power, flat, thin display device made up of color or monochrome pixels arranged in front of a light source or reflector.


. Used . . Used . ...

Auxiliary Output - A seperate line level output from a sound console that is to be used for foldback or monitoring that does not use up another main output. Each in channel has a path to the Auxiliary bus. It is also . Used . useful to send a signal to a separate effects processor.
. Used . ...

Multi Effects - Multi effects applies to any outboard audio effects hardware that is capable of processing the signal through more than one effect. In modern effects hardware multi effects are more common and usuall. Used . y include many different effects by which the audio can be processed.. Used . ...

Moving Mirror Lights - A common term for a moving mirror stage/concert light. This light in particular is common is clubs, discos and lounges. As opposed to the moving head lights that are more common for theatre, concerts. Used . and stage events. . Used .

Line Array Speakers

Line array speakers make up a loudspeaker system to create a sound source that produces an evenly distributed sound output. The driver of each line array element is close enough to the driver of the next element to create constructive interference. The resulting sound waves go farther than sound waves from traditional loudspeakers. Line array systems date back to the early days of research in acoustics. Many old town halls and public venues still have old line source boxes which were found to project voice well though they are much smaller than horn-loaded speakers. These days, line array speakers use different drivers for high-, mid- and low-frequency passbands that must be in line. Each enclosure must be set up closely to form columns composed of these drivers. To increase the frequency range and maximum sound pressure, the number of drivers per enclosure must be increased. The orientation of line array speakers may vary. Vertical arrays are excellent for focusing sound at audiences without wasting output energy on ceilings or empty air above the audience because of its very narrow vertical output with a normally-wide horizontal pattern. On the other hand, horizontal line arrays have a very narrow horizontal output with a tall vertical pattern. For hanging concert speakers which are usually part of a concert reinforcement system, enclosures are set up together using a specialized rigging hardware and they hang from a single point. These line array speakers are curved backward at the lower portion so that the sound will reach more audience.