Buy Used LCD 995 by VFX

Contact a Sales Specialist about used LCD 995 for sale.

LCD 995 LED Lighting

LED quantity: 36 x 3W RGBW LED
Power consumption: 150W
DMX control: 7 channel
Beam angle: 30
Power in: AC110V-240V. 50Hz/60Hz
Size: 230 x 230 x 76 mm
Weight: 1.5 kgs

VFX LED Lighting

Power Distro - A power distro send power evenly and appropriately to various staging and rigging equipment to insure there is enough power to properly run the various equipment.. Used . . Used . ...

Kelvin - The kelvin (symbol: K) is the SI unit of temperature, and is one of the seven SI base units. It is defined by two facts: zero kelvins is absolute zero (when molecular motion stops), and one kelvin is . Used . the fraction 1/273.16 of the thermodynamic temperature of the triple point of water. The Celsius temperature scale is now defined in terms of the kelvin, with 0 °C corresponding to 273.15 kel. Used . vins, approximately the freezing point of water under ordinary conditions.

The kelvin is named after the British physicist and engineer William Thomson, 1st Baron Kelvin; his barony was in turn na...

Zoom Flash - A flash with the capability of adjusting the width of its beam to accurately fit the angle of the lens being used.. Used . . Used . ...

LED - An LED or light emitting diode is simply a tiny light bulb that fits into an electrical circuit. However, unlike ordinary bulbs, LEDs don't have a filament that will burn out and generate very little . Used . heat. They are illuminated by the movement of electrons in a semiconductor material and last as long as a standard transistor.. Used . ...

Converters and Sync - An audio converter is a type of electronic hardware that converts analog audio signals to digital audio format or vice versa. Audio synchronizers arrange the signals, either analog, digital or both, s. Used . o that multiple the signals occur in time. . Used . ...

LED Lighting

LED lighting is a specialized kind of stage lighting which is highly valued by technicians due to its high light output and low power consumption. Used as an alternative to traditional stage lighting such as halogen lamps, LED stage lighting is a more than capable alternative for just about any kind of application, although it is primarily used for lighting cycloramas, and for side, back and top lighting. In addition to these uses, LED lighting can be used to “blind the audience”, a nice special effect which involves briefly exposing the audience to a direct light beam from the LED stage lighting at crucial moments of the concert or show. LED wash lights are also great for applying a technique known as “wall washing”, thanks to the high intensity of their light beam. LED wash lights can provide the full spectrum of light colors, despite usually only being fitted with green, blue and red LEDs. The operator simply needs to adjust the intensity of the various colored beams of light, manipulating them to achieve the desired color spectrum. LED lighting is provided by three pieces of equipment. The most common are LED Pars, which imitate traditional stage lights and have a number of LEDs mounted onto them. Striplights, which are basically a long length of LED wash lights, are also very common, while the versatility of moving LED lights is also becoming an increasingly preferred option for many stage lighting technicians. Besides its higher light output and lower power consumption, LED lighting has a number of other advantages. One is that they have an exceptionally high heat tolerance, which means they can be used almost anywhere without worrying about them becoming damaged due to overheating. Another advantage of LED lighting is that it has a much longer shelf life than traditional lighting.