Buy Used Impression by Elation

Contact a Sales Specialist about used Impression for sale.

Impression Moving Lights

...tics with the fixture weighing in at 16 lbs gives an output lumen to physical weight ratio that is unmatched. Less weight in the truck and rig is always better.

Faster...
State of the art stepper motor control and compact moving mass for quick and accurate movements moving 660 degree pan in less than 2 seconds while at the same time offering smooth and fluid movements.

Brighter...
90 Luxeon K2 LED's arranged in a maximum density allows for light output comparable and often brighter color to color of 575w discharge fixtures.

With the Impression, Elation Professional introduces a new LED Moving Head in an ultimately compact format. Through its flexible installation options the unit can be installed in various orientations making the Impression especially suitable for a variety of applications. Impression offers all the advantages of LED fixtures:


•Low Power Consumption / High Output (60 lumens per watt)

•Low Heat Emission and no UV or IR

•Long Life Operation

•Fast & Smooth Color Fades

Through the use of the new K2 Luxeon high performance LED's, the unit reaches light output higher than a 575W discharge lamp with no less than a 50% power savings. It comes available as an RGB version with 30 LED's per Color Producing colors through the whole color spectrum and also comes in a White LED version featuring WHITE and AMBER LED's allowing color temperature control from daylight to tungsten. The movement range of the Impression is also unmatched reaching 660 degrees of Pan and 300 degrees of Tilt. These features make the unit ideal for professional stage, theatre, television, exhibit and architectural applications. The Impression is designed in Germany and built in Europe with several international design and application patents pending.

SPECIFICATIONS
Light Source:

• Additive color mixing

• 90 Luxeon K2 high power LEDs

• Average service life: 100,000 hr.

RGB VERSION:

• 30 LEDs per color wave lengths optimized for maximum visible color gamut

WHITE VERSION:

• 60 cold white LEDs, 30 amber LEDs allow continuous color temperature adjustment

OPTICAL SYSTEM:

• Highly efficient collimator cluster

• Interchageable lens carrier with 10deg beam angle (25deg optional)

• Intergrated stray light screen

MOVEMENT:

• High precision stepping motor control

• 8 or 16 bit resolution selectable

• Maximum speed 660deg Pan in 2 sec., 300deg Tilt in 1 sec.

• Position - Feedback

CONTROL:

• DMX-512 protocol

• Backlit graphic LCD control panel

• 4 illuminated buttons

• Low noise temperature control ventilation system

• Overheat protection

• Color calibration feature

• Internal color presets

CONNECTORS:

• DMX XLR 3-pin

• Mains voltage: Powercon input
&nb

Elation Moving Lights

Elation Professional - Professional Lighting & Entertainment Products and Accessories!

Discharge Lamp - A high powered light source produced by an arcing electrical discharge between two electrodes suspended in a glass tube filled with gas, usually high or low pressure sodium gas, xenon, mercury vapor, . Used . or metal halide. This type of illumination is limited to applications such as followspots and projection, where dimming is accomplished by mechanical instruments. Many newer generation mov. Used . ing lights use discharge lamps, dichroic filters and mechanical dimming shutters....

Auxiliary Output - A seperate line level output from a sound console that is to be used for foldback or monitoring that does not use up another main output. Each in channel has a path to the Auxiliary bus. It is also . Used . useful to send a signal to a separate effects processor.
. Used . ...

Wrap - A term used in Rigging for a short sling used to wrap a beam or truss or the action of wrapping a truss. In film and television production WRAP is an acronym for Wind Reel And Print and announces the. Used . end of a scene or session. . Used . ...

Fresnel Lens - A Fresnel lens is a type of lens invented by Augustin-Jean Fresnel. Originally developed for lighthouses, the design enables the construction of lenses of large size and short focal length without th. Used . e weight and volume of material which would be required in a lens of conventional design.

The Fresnel lens (often pronounced FREZ-nell but usually the original fre-NELL in theatr. Used . ical and motion picture lighting applications) reduces the amount of material required compared to a conventional spherical lens by breaking the lens into a set of concentric annular sections known as Fresnel

Large Format Mixers - Large format mixers are audio mixers having more than 24 channels for input/output.. Used . . Used . ...

Moving Lights

Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting. Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator. Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators. Moving lights are hooked up to a lighting control console and send data to it in one of three ways – through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard). So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the “personality” of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them “live”, if they have the experience to do so.