Buy Used ITECH 9000 HD by Crown

Contact a Sales Specialist about used ITECH 9000 HD for sale.

ITECH 9000 HD Amp Rack Units

...re your schedule takes you. Universal AC input accepts100-240VAC, 50/60 Hz (±15%).
• Front-panel USB connector transfers presets to/from a USB drive to the amp's DSP
• New software interface based on customer feedback manages presets, provides easier system-level changes,
and includes a configuration wizard
• The only product available with analog, AES/EBU, CobRanet, HiQnet and EThernet connectivity standard
• User definable front-panel security feature

Crown Amp Rack Units

Crown international Manufacturer of power amplifiers, microphones, and processing for the professional audio industry.

Lighting instruments - There are a variety of instruments frequently used in the theater. Although they vary in many ways they all have the following four basic components in one form or another...

* Box/Housin. Used . g - a metal or plastic container to house the whole instrument and prevent light from spilling in un-wanted directions.
* Source of light (bulb or lamp).
* Lens or opening - the g. Used . ap in the housing where the light is intended to come out.
* Reflector - behind or around the light source in such a way as to direct more light towards the lense or opening.

Additional feat...

Amplifier - The amplifier can be considered to be any device that uses a small amount of energy to control a larger amount, although the term today usually refers to an electronic amplifier. The relationship of t. Used . he input to the output of an amplifier — usually expressed as a function of the input frequency — is called the transfer function of the amplifier, and the magnitude of the transfer function . Used . is termed the gain. There are numerous types of electronic amplifier depending upon the application....

Adaptor - A connector allowing more than 2 electrical devices to be connected to a single power source. These connections are normally in parallel (each device is given the same voltage levels), but current is . Used . divided between them. Also known as a "Twofer".

3-way splitters are known as "Threefers".. Used . ...

Reverb - Reverb is an audio effect that reproduces the many echos that occur when a sound is produced in an enclosed space where the sound is reflected repeatedly by the boundaries of the enclosure, even after. Used . the source of the sound stops. The number of echos and the duration of the echos can be varied and with some modern effects units, the shape of the enclosure can be altered as well.. Used . ...

Angstrom - An angstrom, angström, or ångström (symbol Å) is a unit of length. It is not an SI unit. It is accepted (although discouraged) for use with the SI. It is used sometimes used expressing the size of ato. Used . ms, and lengths of chemical bonds and visible-light spectra.

The ångström is named after the Swedish physicist Anders Jonas Ångström (1814–1874), one of the founders of spectrosc. Used . opy. Besides astrophysics, Ångström was also a student of heat transfer, terrestrial magnetism, and the aurora borealis, which was so prominent for him in his northern skies. He created a spectrum chart of sol...

Amp Rack Units

Amp rack units refer to an assortment of rack-mounted or rack-protected PA amplification or sound reinforcement equipment that is set up to work with a mixer and loudspeakers. An amplifier, also called a power amplifier, is a basic signal processing unit that increases the power of an audio signal to make the sound from a human voice or music louder. A pro audio amplifier is used in professional sound systems as the last active component in the signal chain because it receives input from mixers or other signal processing units, increases the power of the signal, and sends the output to speakers. There are other types of amplifiers also referred to as amp rack units. A touring amplifier is simply a power amplifier that is designed to withstand conditions that touring musicians are exposed to especially being on the road most of the time. Live power amplifiers are used to support the audio demands of live performances. These amps make help create the unique experience of sound in live concerts. Some amp rack units are built by combining or adding amplifier modules with other parts. These are amplifier sub-units or parts designed to meet certain specifications. To have a whole amplification unit you may need a transformer, bridge rectifiers and filter capacitors, speaker connectors, input connectors, volume control, heatsink and a suitable rack mount case.