Buy Used FC-816 by

Contact a Sales Specialist about used FC-816 for sale.

FC-816 Lighting Consoles

The lighting control console shall have one manual 16 channel scene plus 8 preset programmable scenes. Scenes are
activated by heavy duty switches. Four 14 step chases are user programmable. There shall be an overall master blackout control, control of the chase rate via tap control or an audio input jack, and fade control between chase steps. The console shall have a nonvolatile memory to retain scenes and chases when powered off.

Lighting Consoles

Cue - Generally, a lighting board operator has a cue sheet for each scene, which is a diagram of the board with the faders in their positions as determined by the lighting designer. The operator sets the fa. Used . ders into their positions based on the cue sheets. Typically during a cue, the operator sets the next scene. Then, the operator makes the transition between the scenes using the cross-fader.. Used . ...

Effects - Lighting Effects are devices that are generally used to enhance other lighting or staging devices, like foggers, lasers or pyrotechnics and can also have and effect on setting the mood during a perfor. Used . mance like color changers.

. Used . ...

Platforms - Some stages are made up of many smaller table like platforms so they can be easily transported or stored. These platforms are generally used in the forming of large stages, are fastened together, com. Used . e in different hights and widths and have different materials for their surface, like woods and canvases. . Used . ...

Aircraft Landing Light - A narrow beam PAR lamp (28 volt) that is used on aircraft and often adopted for PAR64 and PAR46 lamps. They are most commonly 4 lamps wired in series to attain the required voltage of the circuit as . Used . close to 120 volts. ACL lamps have a higher intensity, brightness and color temperature than the standard PAR lamp.

ACL lamps are more expensive than standard PARs and have a sho. Used . rter life.

Lighting Control Console - Lighting control consoles (also called lighting boards or lighting desks) are electronic devices used in theatrical lighting design to control multiple lights at once. They are used throughout the ent. Used . ertainment industry and are normally placed at the FOH position or in a control booth. All lighting control consoles can control dimmers which, in turn, control the brightness of the lights. . Used . Many modern consoles can also control intelligent lights (lights that can move and change colors), fog machines and hazers, and other special effects devices. Consoles communicate with the dimmers and other de...

Lighting Consoles

Lighting consoles are electronic devices for controlling multiple lights simultaneously from one point. Dimmers for controlling lighting intensity, automated lighting, fog machines and hazers are some of the special effects lighting devices controlled by a lighting board or lighting desk (other terms for lighting consoles). An electronic control protocol is used by lighting consoles to communicate with other devices in the lighting system. Some of these are DMX512, ACN and DMX-512-A. New protocols are being introduced as more sophisticated lighting systems become available. In the entertainment industry, where theatrical lighting design is mostly used, lighting consoles are usually found in the control booth, auditorium or the foyer. For this application, the most common protocol is DMX512. Lighting consoles are available in different sizes and complexities. A preset board, a conventional console for basic lighting systems, is used mostly for small setups. However, DJs may complement it with more advanced hybrid consoles. A moving light controller works with dimmers for controlling ordinary lighting. It also provides additional controls for automated stage lighting (also called intelligent lighting) to produce very complex lighting effects. Other types of lighting consoles include memory consoles, personal-control based controllers, and remote focus unit. The light board operator (also called the light op or board op) is the person who operates the lighting console. Depending on the scale and type of production, he can be the lighting designer or the stage manager. He or she is responsible for conventional or automated lighting fixtures as well as controlling video.