Buy Used Event MH W System by Elation

Contact a Sales Specialist about used Event MH W System for sale.

Event MH W System LED Moving Lights

...
• Step-less, smooth RGB additive color mixing, 16.7 million colors (24-bit)

• Pre-programmed colored macros

• StRobe-effect with a maximum flash rate of 18fps (white or color)

• 12 or 10 DMX-channel operation (16 or 8 bit operation)

• Flicker-free operation for television and film

• Brilliant light output

• Beam angle: 25 degree

• 3 operation mode: DMX controlled, stand alone or sound activated
(via internal microphone)

• Dimmer intensity from 0%~100%

• Control board with 4-digit display and foil-keyboard

• Digital display can be turned 180deg to fit different installation positions

• RDMX (Remote DMX addressing from any DMX console)

• Auto test for all functions

• Automatic Pan/Tilt Correction

• USITT DMX-512 Complaint

• Value of each DMX-channel can be displayed

• Built-in Power Supply

• Built-in 3-pin XLR serial data connection

• Operate standing up or hanging up-side-down

• 8 User Assignable Program Presets - Internal Program: Edit and save programs to the incorporated EEPROM through the front control panel or external controller; you can save a maximum of 48 scenes, and run the saved programs by using the “run menu on the front control panel

• Dimensions (LxWxH): 11.5x11.25x13.75 / 290x282x347mm

• Weight: 19 lbs. / 8.8 kgs.

• Voltage: 100V 120V 208V 220V 230V 240V

Elation LED Moving Lights

Elation Professional - Professional Lighting & Entertainment Products and Accessories!

Beamage - The beam of light projected from lights as it appears in the air.. Used . . Used . ...

Alternating Current - An alternating current (AC) is an electrical current where the magnitude and direction of the current varies cyclically, as opposed to direct current, where the direction of the current stays constan. Used . t. The usual waveform of an AC power circuit is a sine wave, as this results in the most efficient transmission of energy. However in certain applications different waveforms are used, such a. Used . s triangular or square waves.

Used generically, AC refers to the form in which electricity is delivered to businesses and residences. However, audio and radio signals carried on electrical wire ar

Fog - A fogger is a device that emits a dense vapor that appears similar to fog or smoke,
usually by the vaporization of a water and glycol based or glycerine based fluid. A hazer or diffusion fogger. Used . is used to produce an atmospheric haze, rather than clouds of smoke, and is used by many lighting designers to reveal airborne light beams, especially lazers. . Used . ...

Ground Support - In Staging, Ground Support applies to any electrical or mechanical device to aid a rigging crew in lifting and placing staging gear, lighting or audio gear into place.. Used . . Used . ...

Absorption - A surfaces ability to absorb sound. Absorption is rated from 0 to 1.

Full absoption is 1. Full reflection is 0. . Used . . Used .

LED Moving Lights

LED moving lights are used for stage lighting and to illuminate important scenes. Unlike regular lights these lights have additional automated capabilities and mechanical abilities that regular lights simply don’t have. The LED moving lights most commonly utilized for stage performances also have the ability to produce intricate special effects. Featuring immense versatility and multi-functionality, LED moving lights have almost completely replaced the out of date non-moving lights used in the past. When used properly LED moving lights have the ability to change the complete personality of a show. Most shows preprogram the lighting for their shows, which will decrease the chances of human errors during a live performance. Moving lights are usually controlled via a lighting control console from a booth, which communicates with a control signal. Data from the control signal is then sent to an analogue, Ethernet control or DMX. Generally, moving lights are controlled by DMX protocol, which consists of 5-pin XLR connectors and shielded cables. Just like other types of moving lights, LED moving lights can be easily altered. Some variables that can be changed include the color of the light, intensity of the light, pattern of light, swing pattern, and speed. The only disadvantage of using LED moving lights instead of analogue lights is that take more time to program and get used to. However, there are many expert programmers and LED moving light operators out there that can easily control the multiple features of the lighting board console. Innovative LED moving lights are now trying to integrate digital projectors with the lights. They will be able to control the intensity of moving lights, the focus of the lights, as well as the video content display behind the lights.