Buy Used E25 by MC2 Audio
The E Series is a range of lightweight, high-power switch mode amplifiers designed to the highest standards of reliability and sound quality. Developed for the touring market, E Series retain the sonic integrity of the benchmark MC and T Series amplifiers, without the physical weight.
The switch mode Power Supply is capable of delivering high peaks without any perceptible bass 'sag' at very low distortion and is kept within its safe operating area by the new, sophisticated MC˛ Audio 'intelli...
Also Known As: Used e25
Used Amp Rack Units For Sale
$4,347 USD : €3.458 EUR
Used on an installation. Always cleaned after each use. Bottom 2 racks in photo.
$1,424 USD : €1.133 EUR
Used on a few various rentals. From 2004. All gear is in very good condition.
Contact a Sales Specialist about used E25 for sale.
+1.404.817.9300
E25 Amp Rack Units
...d MC˛ Audio 'intelligent' limiter. The E15, E25, E45 and E4-75 feature MC˛ Audio's proprietary current driven output stages for ultra-high definition sound, delivered over the entire audio bandwidth.The E90 and the E100 are Class D amplifiers designed to meet the demands for higher power with increased efficiency whilst still maintaining the renowned MC2 Audio sonic qualities and unsurpassed reliability.
MC2 Audio Amp Rack Units
A Hazer by contrast create a more diffusive, expansive haze that is usually not a thick and is used to enhance other e. Used . ffects, such as lighting and light beams.
Amp Rack Units
Amp rack units refer to an assortment of rack-mounted or rack-protected PA amplification or sound reinforcement equipment that is set up to work with a mixer and loudspeakers. An amplifier, also called a power amplifier, is a basic signal processing unit that increases the power of an audio signal to make the sound from a human voice or music louder. A pro audio amplifier is used in professional sound systems as the last active component in the signal chain because it receives input from mixers or other signal processing units, increases the power of the signal, and sends the output to speakers. There are other types of amplifiers also referred to as amp rack units. A touring amplifier is simply a power amplifier that is designed to withstand conditions that touring musicians are exposed to especially being on the road most of the time. Live power amplifiers are used to support the audio demands of live performances. These amps make help create the unique experience of sound in live concerts. Some amp rack units are built by combining or adding amplifier modules with other parts. These are amplifier sub-units or parts designed to meet certain specifications. To have a whole amplification unit you may need a transformer, bridge rectifiers and filter capacitors, speaker connectors, input connectors, volume control, heatsink and a suitable rack mount case. Used E25 For Sale
5 Day
Warranty
Popular Amp Rack Units
Designed as a cost-effective solution specifically for sound contractors, the ISA Series features seven models including four low impedance models (ISA 280, ISA 450, ISA 750, ISA 1350) rated for 2-ohm operation, and three "Ti" versions with isolated ...
The compact PLX1104 brings the same performance and technology as the rest of the PLX2 Series, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (...
The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality an...
The compact PLX1804 brings the same performance and technology as the rest of the PLX2 Series, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (...







