Buy Used DMX Booster/Splitter by MA Lighting

Contact a Sales Specialist about used DMX Booster/Splitter for sale.

DMX Booster/Splitter Lighting Processors and Networking

...Center Stage and split the DMX line starshaped, reducing the length and load of the single lines. But keep in mind to use special, shielded DMX cable and select shortest cable run, but separate from power supply and load Cables of dimmers.

The DMX booster distributes DMX signals easily and provides a high quality operation reliability by electrically isolating the input and output.

All outputs are amplified except the DMX line „thru“ where the original DMX in line will be available. The MA booster is the ideal tool for star shaped splitted DMX lines for installations in theater or TV Stations as on stages. It provides a reliabel DMX network with reduced length and load of single DMX lines.

Every single DMX line is powered by a seperate power supply and electrically isolated. Output sockets are available as XLR 5-pin or RJ 45 network connectors. The input signal is optically isolated and has a selective termination.

MA Lighting Lighting Processors and Networking

The company was founded in 1983 by Michael Adenau (MA) and enjoys strong growth from the very beginning until today. More than 10,000 MA control desks are being used all over the world and MA´s digital dimming systems have become an industry standard. The success accelerated in 1985, when software specialist Ernst Ebrecht joined MA Lighting as a partner. In this period MA introduced the Lightcommander 24 and Lightcommander 48 control desks. When launched in 1992 the MA Scancommander caused a huge stir in the burgeoning world of moving light control. This product established MA Lighting as a leading innovator of lighting control for the global touring and event sector. Leading producers of intelligent lighting showed great interest in MA's new operating philosophy, which radically differed from the historical "dimmer -oriented" control systems of that time. In the spring of 1998 MA showed the world the eagerly awaited grandMA console. This hybrid lighting control console brought a new level of hardware sophistication to the lighting world. The full color touch screens, motorized faders, built in UPS (uninterruptible power supply) and hard drive were only the beginning. The summer of 2000 saw the launch of a host of new products from MA, the grandMA light, the grandMA replay unit and the grandMA offline editor. In the autumn of 2001, the grandMA range will be completed with the introduction of the grandMA ultra-light. The ultra-light has 1,024 channels but retains the main features of a grandMA at a very competitive price. Today, MA Lighting are well known for their technical know-how and have achieved an unique international reputation for its operational philosophy. MA´s award-winning products are extremely reliable and offer cutting-edge solutions for dimming and control. Organizational Structure This story of success is strongly based on the teamwork between MA and Lightpower. Lightpower, located in Paderborn, is handling the international distribution of MA products since 1987. The two companies work very closely together and, through their respective roles, have made each other stronger. Production, and research & development are located in MA´s modern headquarters in Waldbuettelbrunn. For marketing, sales and technical support Lightpower has founded a new subsidiary: MA Lighting International. All of these activities are coordinated in their Paderborn facilities.

Depth of Field - While a lens focuses on a single plane of depth, there is usually an additional area in focus behind and in front of that plane. This is depth of field. Depth of field increases as the iris is closed.. Used . There is more depth of field the wider the lens and le . Used . ...

Amp Racks - An amp rack is any furniture, fixture, or case where multiple amplifiers are mounted in slots or grooves, generally used in touring systems because they are easy to transport.

. Used . . Used . ...

Ohm - A unit of measurement for the electrical resistance equal to that of a conductor in which a current of one ampere is produced by a potential of one volt across its terminals. One ohm is the resistanc. Used . e in a circuit when one volt maintains a current of one amp. The unit, originally ohma or ohmad, was first used by Charles Tilston Bright and Latimer Clark in 1861 and is still in use today.. Used . ...

Laser - LASER is acronym for Light Amplified by Stimulated Emission of Radiation and is an optical source that emits photons in a coherent concentrated beam. There are many different kinds of LASERs producing. Used . many different colors, but red is the most common.. Used . ...

Multi Effects - Multi effects applies to any outboard audio effects hardware that is capable of processing the signal through more than one effect. In modern effects hardware multi effects are more common and usuall. Used . y include many different effects by which the audio can be processed.. Used . ...

Lighting Processors and Networking

Processors & networking units are essential for lighting technicians as they can add a range of attributes to your light processing, such as extra channels, more calculation power for your network and so on. A DMX network processing unit is essential an integrated circuit with a set of features geared towards optimizing the applications which are being networked together. Processors and networking units are usually software programmable, and come with a number of generic characteristics, similar to standard CPUs which are found in numerous kinds of everyday electrical equipment, such as computers and other electrical products. Processors and networking units come in different shapes and sizes for different uses. The DMX Network Processing Unit is used to boost a network’s calculation power so that more applications can be used simultaneously, while the DMX Network Signal Processing units are used for increasing the number of channels without having any adverse impact on the console’s performance. A DMX Universe Processing Unit generally has a number of functions, including pattern matching, which concerns the ability to locate different bit and byte patters in a packet stream, and control processing, which concerns packet processing operations at a macro level.