Buy Used DJ-Head 575 Wash by FutureLight

Contact a Sales Specialist about used DJ-Head 575 Wash for sale.

DJ-Head 575 Wash Moving Lights

...ing and a stRobe-effect of 1-10 flash per sec.
Silent fans cooling; remotely controllable fan-speed
Addressing via control panel with 4-digit LED display
Remotely switching of the lamp
Preprogrammed variable/random stRobe and dimmer pulse effects
Remotely controllable speed of PAN /TILT movement for easy programming
Remote reset function
16 DMX-channels - 16 bit Pan/Tilt movement resolution
14 DMX-channels - 8 bit Pan/Tilt movement resolution
Pan movement range 530deg
Tilt movement range 280deg
Automatic Pan/Tilt position correction
High luminous-efficiency parabolic reflector
Light-output via Fresnell-lens with a diameter of 200 mm
Radiation-angle of Fresnell-lens motorized and adjustable between 12deg and 34deg
13 high-quality stepper-motors for smooth movements
For MSR 575/2 or MSR 575 lamp
DMX-control via every standard DMX-controller

FutureLight Moving Lights

FutureLight

Plasma - A plasma display panel is a type of flat panel display with many tiny cells located between two panels of glass holding an inert mixture of gases like neon and xenon. The gas is electrically turned in. Used . to a plasma which then excites phosphors that emit light. . Used . ...

Pyro - Pyrotechnics are chemical explosive or flammable firework effects with a manual detonation, usually electrically fired by special fail safe equipment. There are many different kinds of pyrotechnics an. Used . d they are primarily used to enhance a theatrical or musical performances with flashes, smoke, loud bangs and flaming light shows. While similar to fireworks, pyrotechnics are more localized . Used . and generally smaller. ...

Stages - A stage is a designated space for the performance of theatrical productions or other live events. Some stages are permanent structures in theaters, but often stages are temporary structures built for . Used . outdoor events and can range is size from small 20 to 30 square foot structures to very large arena sized stages assembled from many components.. Used . ...

Wrap - A term used in Rigging for a short sling used to wrap a beam or truss or the action of wrapping a truss. In film and television production WRAP is an acronym for Wind Reel And Print and announces the. Used . end of a scene or session. . Used . ...

Wing - A breakout box or extension console that expands the current consoles capabilities by adding additional tactile faders and controls. Generally applied to lighting control consoles and adapted from a . Used . theater term used to describe the sides of the stage not visible to the audience where the actors make their entrances. . Used . ...

Moving Lights

Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting. Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator. Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators. Moving lights are hooked up to a lighting control console and send data to it in one of three ways – through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard). So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the “personality” of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them “live”, if they have the experience to do so.