Buy Used DJ-Head 250 Spot by FutureLight

Contact a Sales Specialist about used DJ-Head 250 Spot for sale.

DJ-Head 250 Spot Moving Lights

...d strobo effect 1-10 flash per sec.
Remotely controllable speed of Pan/Tilt movement for easy programming
Remote reset function
Pan-movement range 530deg
Tilt-movement range 280deg
Automatic Pan/Tilt position correction
High luminous-efficiency parabolic mirror and double condenser system
15deg standard objective
10 high-quality stepper-motors for smooth movements
Self-resetable thermo-fuse
Control-Board with 4-digit display for adjusting the DMX-starting address
For MSD/HSD 250 or MSD 250/2 lamp
DMX-control via every standard DMX-controller

http://www.nme.com/video/id/6rt3cZIEw00/search/FutureLight

FutureLight Moving Lights

FutureLight

Stepper Motor - A stepper motor is a type of electric motor that is used when something has to be positioned very precisely or rotated by an exact angle.

In a stepper motor, an internal rotor containing. Used . permanent magnets is controlled by a set of stationary electromagnets that are switched electronically. Hence, it is a cross between a DC electric motor and a solenoid. Stepper motors do not. Used . use brushes and commutators.

Stepper motors have a fixed number of magnetic poles that determine the number of steps per revolution. Most common stepper motors have 200 full steps/revolution, mea

Yoke - The metal strip running over the top and on both sides of a light to which the G-Clamp is attached. . Used . . Used . ...

Over 10000 Lumens - A projector that produces over 10000 lumens of light.. Used . . Used . ...

Analog signal - An analog or analogue signal is any variable signal continuous in both time and amplitude. It differs from a digital signal in that small fluctuations in the signal are meaningful. Analog is usually t. Used . hought of in an electrical context, however mechanical, pneumatic, hydraulic, and other systems may also use analog signals.

The word "analog" implies an analogy between cause an. Used . d effect, voltage in and voltage out, current in and current out, sound in and frequency out.

An analog signal uses some property of the medium to convey the signal's information. For example, an ...

House Lights - House lights are incandescent or fluorescent floodlights. House lights provide light for the audience before and after performances and during intermissions. Work lights provide general lighting backs. Used . tage, or in the house. House lights are often controlled by dimmers, but are sometimes on simple switches. Work lights are almost always switched only. House and work lights are usually off d. Used . uring performances but are occasionally included in the lighting design to establish focus or emphasize plot elements. ...

Moving Lights

Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting. Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator. Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators. Moving lights are hooked up to a lighting control console and send data to it in one of three ways – through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard). So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the “personality” of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them “live”, if they have the experience to do so.