Buy Used D6 by DB Audiotechnik

Contact a Sales Specialist about used D6 for sale.

D6 Amp Rack Units

...pply voltages 100 V / 115 V / 200 V / 230 V, 50 – 60 Hz and has a temperature and signal controlled fan to cool the internal assemblies. It is specifically designed to deliver medium power into low impedance loads between 4 and 16 ohms. A user definable 4-band parametric equalizer and signal delay capability of up to 340 ms are incorporated and can be applied independently to each channel. A signal generator offering pink noise or sine wave program is also incorporated. The D6 uses its Load monitoring and System check functions to ascertain the status of the loudspeaker impedance. d&b System check verifies that the system performs within a predefined condition, whilst d&b Load monitoring enables an automatic and continuous impedance monitoring. Both can determine the status of an LF or HF driver in systems with multiple elements, even if these are crossed over passively. All of these functions and parameters can be easily accessed and controlled via the LCD in conjunction with the digital rotary encoder or through the d&b Remote network.

DB Audiotechnik Amp Rack Units

d&b audiotechnik has been developing, manufacturing and distributing loudspeaker systems since 1981. The company operates internationally in the field of electroacoustics to produce high quality products for reinforcement of speech and music. Through the amalgamation of technological developments, system integration principals, quality of construction and standards of service, d&b pursues a systems approach that includes all aspects of design, development, manufacture and support. d&b's loudspeakers are used globally in rental and installation markets for events, multimedia, musicals, concert halls, theatres, opera houses, broadcast and everything from the smallest conference room to the largest stadium.

Folding - A folding truss is a truss that folds for easy storage and transport.. Used . . Used . ...

Followspot - Followspot is a generic term used to describe any number of lighting instruments used to highlight performers on stage. A followspot operator moves the followspot to follow the performer or to accent. Used . some action or prop etc. Somtimes called limes, dating back to the days of limelight.

Followspots are generally much brighter than conventional lighting instruments, and often u. Used . se a lamp with a considerably higher color temperature.

Coners and Hinges - Corners are used to attach trusses and other rigging while hinges are used to allow attached rigging to swing open so other gear can be connected.. Used . . Used . ...

Stairs - Stairs are used to access the stage and raised parts of the stage. They are usually collapsable for the purposes of storage and transportation. . Used . . Used . ...

Ohm - A unit of measurement for the electrical resistance equal to that of a conductor in which a current of one ampere is produced by a potential of one volt across its terminals. One ohm is the resistanc. Used . e in a circuit when one volt maintains a current of one amp. The unit, originally ohma or ohmad, was first used by Charles Tilston Bright and Latimer Clark in 1861 and is still in use today.. Used . ...

Amp Rack Units

Amp rack units refer to an assortment of rack-mounted or rack-protected PA amplification or sound reinforcement equipment that is set up to work with a mixer and loudspeakers. An amplifier, also called a power amplifier, is a basic signal processing unit that increases the power of an audio signal to make the sound from a human voice or music louder. A pro audio amplifier is used in professional sound systems as the last active component in the signal chain because it receives input from mixers or other signal processing units, increases the power of the signal, and sends the output to speakers. There are other types of amplifiers also referred to as amp rack units. A touring amplifier is simply a power amplifier that is designed to withstand conditions that touring musicians are exposed to especially being on the road most of the time. Live power amplifiers are used to support the audio demands of live performances. These amps make help create the unique experience of sound in live concerts. Some amp rack units are built by combining or adding amplifier modules with other parts. These are amplifier sub-units or parts designed to meet certain specifications. To have a whole amplification unit you may need a transformer, bridge rectifiers and filter capacitors, speaker connectors, input connectors, volume control, heatsink and a suitable rack mount case.