Buy Used ColorWash 700E AT by Robe

Contact a Sales Specialist about used ColorWash 700E AT for sale.

ColorWash 700E AT Moving Lights

...ic

Optical System
Dichroic glass reflector for maximising the light efficiency
Front Fresnel lens of diameter of 200 mm
Beam angle: 6deg - 45deg

Electrical Specification
Power supply: Electronic auto-ranging
Input voltage range: 100-240 V AC,50/60Hz
Power consumption: 890VA at 230V/50 Hz

Mechanical Specification
Height: 597 mm (23.5") - head in horizontal position
Width: 514 mm (20.2")
Depth: 499 mm (19.7")
Weight: 30.4 kg (67 lbs)
Fixation option: Pan/Tilt-lock mechanism

Thermal
Maximum ambient temperature: 40 degC (104degF)
Maximum surface temperature: 120 degC (248degF)

Control and Programming
Setting & Addressing: Robe Navigation System (RNS)
Protocol: USITT DMX-512, RDM support
Control channels: 18, 20, 21, 22, 23, 24
6 DMX protocol modes
3-editable programs, each up to 99 steps
Stand-alone operation
Display: Blue/white LCD graphic
Pan/Tilt resolution: 16-bit
Movement control: Tracking and vector
Colour wheel positioning: 8- or 16-bit
Beam shaper: 8- or 16-bit
Zoom: 8- or 16-bit
Dimmer: 8- or 16-bit
EThernet port: Art-Net protocol, ready for ACN
Data in/out: Locking 3-pin & 5-pin XLR
Built-in analyser for easy fault finding

Electromechanical Effects
Cyan: 0-100%
Magenta: 0-100%
Yellow: 0-100%
CTO: 0-100%
Colour wheel: 7 replaceable "SLOT&LOCK" dichroic filters + open
Beam shaper: Indexable, continuous rotation in both directions at different speeds
Dimmer/Shutter: Full range dimming and variable stRobe effect, electronic strobbing "ZAP"
Motorized zoom
Pan: 530deg
Tilt: 280deg

Rigging
Mounting points: 4 pairs of ¼-turn locks
2x Omega bracket with ¼-turn quick locks
Safety chain/rope attachment point

Optional Accessories
Module of front wide-angle lens D200
Remote Control IR
Top Hats

Robe Moving Lights

Robe Show lighting . Manfuacturer of high quality Intelligent Lighting systems and products. ROBE Lighting, Inc. Headquarters: 13807 N.W. 4th Street, Sunrise, Florida 33325 Tel.: (954) 615-9100 Fax: (954) 615-9105

Zirconium Lamp - A high intensity point source arc lamp using a zirconium oxide cathode in an argon-filled bulb. Used in powerful projectors because of its low emanation of long-wavelength light and its concentrated . Used . source. Similar to the Drummond light or Limelight, but differing from them chiefly in the employment of cones of zirconium instead of cylinders of lime. It has been outdated and replaced b. Used . y electric lighting....

Bump Button - A lighting console button that performs on action when pressed and another when released. This is a lighting console term.. Used . . Used . ...

Coners and Hinges - Corners are used to attach trusses and other rigging while hinges are used to allow attached rigging to swing open so other gear can be connected.. Used . . Used . ...

Color Changers - A conventional lighting fixture with a remotely controlled colored changeable filter over the lens. There are three kinds of mechanisms used in color changers, a wheel with lens sized holes into which. Used . colored gells can be placed, multiple fixed filters that can be moved in and out of the beam to mix the colors and a scroller which uses continuous, usually dichroic, filters to mix an even . Used . greater number of colors.



...

Hoist - A hoist is a device used for lifting or lowering a load by means of a drum or barrel around which rope or chain wraps. It may be manually operated, electrically or pneumatically driven and may use cha. Used . in, fiber or wire rope as its lifting medium.

A hoist normally is used for lifting (near vertical) and a winch is normally used for pulling (near horizontal).
. Used . ...

Moving Lights

Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting. Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator. Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators. Moving lights are hooked up to a lighting control console and send data to it in one of three ways – through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard). So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the “personality” of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them “live”, if they have the experience to do so.