Buy Used Cobra 2 by Dynacord

Contact a Sales Specialist about used Cobra 2 for sale.

Cobra 2 Cabinet Speakers

...programmed 12 U amp rack,the CSR-12, as well as the necessary 4-core loudspeaker Cables and a 2.5deg wedge set (comprising a pair of wedges that can be placed at the front or back of the cabinets) to aim the COBRA TOPs at the listening area. The coverage pattern of the COBRA-2 SYSTEM is 120deg in the horizontal plane and 15deg in the vertical. Up to six COBRA TOPs and six COBRA SUBs can be driven by the CSR-12 AMP RACK without difficulty. To allow for expansion of the system, the CSR-12 has room for an additional 3U power amplifier (sub extension,separate front-/side-fill or monitor), which gets its current from the CP-44 connector panel. The largest sensible configuration of the COBRA-2 SYSTEM consists of one COBRA-2 array per side (four TOPs and 4-6 SUBs per side). For especially powerful and penetrating bass reproduction, suitable for a wide range of types of music and venue, COBRA PWH bass horns can be integrated into the COBRA-2 SYSTEM. Since doubling the number of COBRA TOP enclosures halves their vertical radiation angle, special attention must be paid to the way they are aligned – regardless of whether they are flown or stacked. A COBRA TOP has a coverage pattern of 120deg x 30deg (horizontal and vertical). Two COBRA TOPs stacked directly on top of one another have a coverage pattern of 120deg x 15deg and four stacked cabinets, 120deg x 7.5deg. With a ground stack, it is easy to aim the TOP cabinets at the listening area by placing CSW-25 2.5deg wedges between the SUBs or the PWHs.

Dynacord Cabinet Speakers

Brands like DYNACORD, ELECTRO-VOICE, RTS and others are under the roof of Bosch Communications, Inc. EVI Audio GmbH as the European headquarters with the electronics manufacturing is located in Straubing, Germany. The loudspeaker boxes are produced in a second facility in Hohenwarth, approximately 45 km away. In Europe approximately 650 employees are occupied, approximately 500 of which are in Germany. Regional PI-distribution offices are in all large areas of business concentration across Germany. EVI Audio GmbH is also responsible for the activities of the subsidiaries in France and UK and for the territory of Africa and Middle East. The place of work is Straubing, a mid-size city in close proximity to the Bavarian Forest with his many idyllic little villages. This area offers all amenities and schools close by and all possibilities of living, leisure and sports.

Analog signal - An analog or analogue signal is any variable signal continuous in both time and amplitude. It differs from a digital signal in that small fluctuations in the signal are meaningful. Analog is usually t. Used . hought of in an electrical context, however mechanical, pneumatic, hydraulic, and other systems may also use analog signals.

The word "analog" implies an analogy between cause an. Used . d effect, voltage in and voltage out, current in and current out, sound in and frequency out.

An analog signal uses some property of the medium to convey the signal's information. For example, an ...

Stages - A stage is a designated space for the performance of theatrical productions or other live events. Some stages are permanent structures in theaters, but often stages are temporary structures built for . Used . outdoor events and can range is size from small 20 to 30 square foot structures to very large arena sized stages assembled from many components.. Used . ...

Ellipsoidal - Ellipsoidal is the name for a type of theatrical light, getting the name from the ellipsoidal reflector used to intensify the light of a back-loading lamp through the barrel and lens. Ellipsoidals are. Used . used for their strong, well-defined light and their versatility.

Characteristics of an ellipsoidal lighting unit include:

* An adjustable barrel, allowing a lightin. Used . g designer to change the size and focus of the light thrown by the unit by changing the distance between the mirror and the lens or lenses
* A set of brackets on the end of the barrel for the insertion o...

Analog to Digital Converter - In electronics, an analog-to-digital converter (abbreviated ADC, A/D, or A to D) is a device that converts continuous signals to discrete digital numbers. Typically, an ADC converts a voltage to a di. Used . gital number. The digital to analog converter or DAC performs the reverse operation. . Used .

Wings and Processors - Wings and processors are used to extend the capabilities of lighting control consoles. Wings usually add faders, bump buttons, displays, and other functions to the console while processors consolidate. Used . , alter, redirect or synchronize the signals coming to and from the console. Consoles often have wings designed specifically for use with that console, but processors are more generalized.. Used . ...

Cabinet Speakers

Speaker cabinets are specially engineered units in which audio equipment such as speakers and their associated hardware are mounted into. These cabinets can be very basic affairs, little more than a wooden case with no additional features other than one port for inputting a sound cable, or they can be incredibly complex cabinets with features ranging from numerous ports and internal baffles to acoustic insulation and composite materials used in their construction. The main point of housing loud speakers and PA speakers in cabinets is not simply to make them look neat and tidy, although that is one benefit. The cabinet actually provides a useful function in preventing competing sound waves from interacting with each other and distorting the end product. This is because the diaphragm that the speaker driver uses to create the sound we hear generates sound waves both at the front and the rear, and these will be out of sync with each other, thus creating a distortion if not dealt with adequately. Other side effects include echo and reverberation, as the sound waves would reach the audience at slightly different times as they travel on different paths through the loud speakers towards them. In addition to minimizing these unwanted side effects, loud speaker’s cabinets also help to manage the vibrations which are caused by the driver frame, as well as the buildup of heat that is associated with amplifiers, driver voice coils and other moving components in PA speakers.