Buy Used CL-1600 by Dynacord

Contact a Sales Specialist about used CL-1600 for sale.

CL-1600 Amp Rack Units

...nd thermal leakage.

CL Series power amplifiers satisfy all the criteria for punishing 'on the road' use. They are reliably protected against overheating, overload and short-circuits as well as high frequency and DC at the output. The 'soft start' function employs relays to insert a delay between switching on the device and the activation of the power outputs. A further circuit limits the current on power-up, there-by protecting the mains fuses. Dynacord amplifiers constantly monitor the input- versus the outputsignal by means of super-fast audio processors which send -in case of non-linear operation- control parameters to the limiters. The limiters are thus operating dynamically and do not affect the amplifiers dynamic capabilities as they control the input gain level. Thermal stability is provided by a 3-stage fan with a very low noise level.

The inputs are electronically balanced and implemented on XLR connectors, whilst Direct Outs for looping the signal are also standard. Input routing permits the choice between Mono and Stereo modes. Mono bridged mode is also easy to realize thanks to the separate Bridged Out connectors and the Bridged Mode switch.

Dynacord Amp Rack Units

Brands like DYNACORD, ELECTRO-VOICE, RTS and others are under the roof of Bosch Communications, Inc. EVI Audio GmbH as the European headquarters with the electronics manufacturing is located in Straubing, Germany. The loudspeaker boxes are produced in a second facility in Hohenwarth, approximately 45 km away. In Europe approximately 650 employees are occupied, approximately 500 of which are in Germany. Regional PI-distribution offices are in all large areas of business concentration across Germany. EVI Audio GmbH is also responsible for the activities of the subsidiaries in France and UK and for the territory of Africa and Middle East. The place of work is Straubing, a mid-size city in close proximity to the Bavarian Forest with his many idyllic little villages. This area offers all amenities and schools close by and all possibilities of living, leisure and sports.

Zoom Ellipsoidal - A type of profile spot with two lenses allowing the adjustment of both the size of the beam and whether it is a hard or soft focus. This adjustment of focal length makes for an instrument with many us. Used . es around the stage. The flexibility is also vital when working with gobos. Also known (in the US) as a Zoom Ellipsoidal.. Used . ...

Wavelength - The distance from one point, usually the crest, on a vibrating wave to the same point on the next wave. The shorter the wavelength the higher the frequency and the more directional the wave and vice . Used . versa. Commonly designated by the Greek letter lambda (?), wavelengths are usually measured in Angstroms.. Used . ...

Wings and Processors - Wings and processors are used to extend the capabilities of lighting control consoles. Wings usually add faders, bump buttons, displays, and other functions to the console while processors consolidate. Used . , alter, redirect or synchronize the signals coming to and from the console. Consoles often have wings designed specifically for use with that console, but processors are more generalized.. Used . ...

Speaker - A speaker is a device that converts an electrical signal into the equivalent air vibrations in order to make audible sound.. Used . . Used . ...

Aircraft Landing Light - A narrow beam PAR lamp (28 volt) that is used on aircraft and often adopted for PAR64 and PAR46 lamps. They are most commonly 4 lamps wired in series to attain the required voltage of the circuit as . Used . close to 120 volts. ACL lamps have a higher intensity, brightness and color temperature than the standard PAR lamp.

ACL lamps are more expensive than standard PARs and have a sho. Used . rter life.

Amp Rack Units

Amp rack units refer to an assortment of rack-mounted or rack-protected PA amplification or sound reinforcement equipment that is set up to work with a mixer and loudspeakers. An amplifier, also called a power amplifier, is a basic signal processing unit that increases the power of an audio signal to make the sound from a human voice or music louder. A pro audio amplifier is used in professional sound systems as the last active component in the signal chain because it receives input from mixers or other signal processing units, increases the power of the signal, and sends the output to speakers. There are other types of amplifiers also referred to as amp rack units. A touring amplifier is simply a power amplifier that is designed to withstand conditions that touring musicians are exposed to especially being on the road most of the time. Live power amplifiers are used to support the audio demands of live performances. These amps make help create the unique experience of sound in live concerts. Some amp rack units are built by combining or adding amplifier modules with other parts. These are amplifier sub-units or parts designed to meet certain specifications. To have a whole amplification unit you may need a transformer, bridge rectifiers and filter capacitors, speaker connectors, input connectors, volume control, heatsink and a suitable rack mount case.