Meet us in person at... infoComm 2012Booth# C12203

Buy Used CI80 by DB Audiotechnik

Ci80 is especially designed for delay, surround and fill purposes, for AV and conferencing and in small full range applications. With a frequency response of 75 Hz to 20 kHz it can even be used withouT Subwoofers. Subwoofers such as E12 or Ci-SUB are required for higher total system SPL and extended low end.

Also Known As: Used ci80

Used Line Array Speakers For Sale
$4,502 USD  :  €3.581 EUR
Used on various rentals.
$28,916 USD  :  €23.000 EUR
Used on various rentals. Includes (3) dollies and (3) covers.

Contact a Sales Specialist about used CI80 for sale.
+1.404.817.9300

CI80 Line Array Speakers

Ci80 is especially designed for delay, surround and fill purposes, for AV and conferencing and in small full range applications. With a frequency response of 75 Hz to 20 kHz it can even be used withouT Subwoofers. Subwoofers such as E12 or Ci-SUB are required for higher total system SPL and extended low end.

DB Audiotechnik Line Array Speakers

d&b audiotechnik has been developing, manufacturing and distributing loudspeaker systems since 1981. The company operates internationally in the field of electroacoustics to produce high quality products for reinforcement of speech and music. Through the amalgamation of technological developments, system integration principals, quality of construction and standards of service, d&b pursues a systems approach that includes all aspects of design, development, manufacture and support. d&b's loudspeakers are used globally in rental and installation markets for events, multimedia, musicals, concert halls, theatres, opera houses, broadcast and everything from the smallest conference room to the largest stadium.
Stairs - Stairs are used to access the stage and raised parts of the stage. They are usually collapsable for the purposes of storage and transportation. . Used . . Used . ...

Ethernet - Ethernet (this name comes from the physical concept of ether) is a frame-based computer networking technology for local area networks (LANs). It defines wiring and signaling for the physical layer, an. Used . d frame formats and protocols for the media access control (MAC)/data link layer of the OSI model. Ethernet is mostly standardized as IEEEs 802.3. It has become the most widespread LAN techno. Used . logy in use during the 1990s to the present, and has largely replaced all other LAN standards such as token ring, FDDI, and ARCNET. ...

Other Effect - Any audio effect not otherwise defined or described.. Used . . Used . ...

Mixers - A mixer is an electronic device for combining or "mixing" audio signals by routing and changing the level, tone, and/or dynamics of the audio signals. A mixer can mix analog or digital signals depend. Used . ing on the type of mixer. The modified signals are then combined to produce a unified signal output. Mixers can vary in size and function ranging from small format having a few inputs for a . Used . DJ to large format having dozens of inputs for studio recording....

Scanners - A scanner is an intelligent light that uses a mirror to perform a large variety of effects and operations while the fixture itself remains stationary. Scanners are generally remotely controlled by a l. Used . ighting control console, but some can be preprogrammed. A single scanner can replace the functions of many conventional lights and can often perform tasks conventional lights can not. Most m. Used . odern scanners utilize DMX-512 signals for control, but some can be controlled by way of analog signals as well. ...

Line Array Speakers

Line array speakers make up a loudspeaker system to create a sound source that produces an evenly distributed sound output. The driver of each line array element is close enough to the driver of the next element to create constructive interference. The resulting sound waves go farther than sound waves from traditional loudspeakers. Line array systems date back to the early days of research in acoustics. Many old town halls and public venues still have old line source boxes which were found to project voice well though they are much smaller than horn-loaded speakers. These days, line array speakers use different drivers for high-, mid- and low-frequency passbands that must be in line. Each enclosure must be set up closely to form columns composed of these drivers. To increase the frequency range and maximum sound pressure, the number of drivers per enclosure must be increased. The orientation of line array speakers may vary. Vertical arrays are excellent for focusing sound at audiences without wasting output energy on ceilings or empty air above the audience because of its very narrow vertical output with a normally-wide horizontal pattern. On the other hand, horizontal line arrays have a very narrow horizontal output with a tall vertical pattern. For hanging concert speakers which are usually part of a concert reinforcement system, enclosures are set up together using a specialized rigging hardware and they hang from a single point. These line array speakers are curved backward at the lower portion so that the sound will reach more audience.
Used CI80 For Sale
Call for more information on this listing.

$1,041 USD
€828 EUR
More currencies
Quantity:
2
Year:
Call for Age
Normal Wear & Tear

2 Day
Warranty
Popular Line Array Speakers
This 300W loudspeaker is designed for use in single and multiple configurations in permanently-installed indoor applications. The slim profile of the Panaray MA12 speaker adds an attractive design element to any installation. The Panaray MA12 loudsp...
J8
J8 loudspeaker The J8 is a 3-way design housing 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated wave-shaping device. The mechanical and acoustical design enables flo...
J subwoofer The J-SUB is an actively driven 2-way bass-reflex design housing three long excursion neodymium 18" drivers, two drivers face to the front and one driver to the rear. The cardioid dispersion pattern resulting from this approach avoids un...
J12
J12 loudspeaker The J12 is a 3-way design housing 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated wave-shaping device. The mechanical and acoustical design enables f...


$275,000
€218.723
Complete package of (32) Y10, (8) T21 ...

$5,230
€4.160
No R&R touring history. Dry-hire equip...

$66,771
€53.110
Complete D.A.S. audio line array syste...

$5,865
€4.665
Full working order. Comes with a 10 da...

$3,169
€2.521
Used With Great Success on Many Tourin...

$23,856
€18.975
XLC127 package. From installation. Nor...

Glossary
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z