Buy Used Atlantis 1.2K by G-Lites

Contact a Sales Specialist about used Atlantis 1.2K for sale.

Atlantis 1.2K Follow Spots

...hanges through main controller or connecting the DMX512 controlling table so as to avoid the inconvenience caused by operator communication ).
4 Channels.

SET UP
Key and push-pull switch integration, easily use.
Accurate barycenter, flexible and adjustable controlling panel make the operation easy and accurate.

POWER
200-220 V – 60 Hz.
PFC Power factor compensation.
According to various kinds of safety standards, IP20 protect grades.

CONSUMPTION
Power Consumption: 1500 W.

DIMENSIONS
L 975 W 400 H 318 mm
L 38.39 W15.75 H12.52 inches

WEIGHT
Aluminium alloy and casting steel plate shell design.
Followspot weight: 43 Kg.
Power Supply weight: 30 kg.

G-Lites Follow Spots

Grace Lites Corporation 42245 Remington Ave. Suite B17 Temecula, California, 92590

Scanners - A scanner is an intelligent light that uses a mirror to perform a large variety of effects and operations while the fixture itself remains stationary. Scanners are generally remotely controlled by a l. Used . ighting control console, but some can be preprogrammed. A single scanner can replace the functions of many conventional lights and can often perform tasks conventional lights can not. Most m. Used . odern scanners utilize DMX-512 signals for control, but some can be controlled by way of analog signals as well. ...

Rigging Hardware - Rigging Hardware applies to all the pins, hooks and other pieces used to connect and hoist gear into place.. Used . . Used . ...

Zoom Flash - A flash with the capability of adjusting the width of its beam to accurately fit the angle of the lens being used.. Used . . Used . ...

Conventional Lighting - Conventional lighting is made up of stationary lights that can be moved, but only via manual means of adjusting, or focusing the fixture with a yoke.. Used . . Used . ...

Hertz - A unit of measure for frequency generally applied to waveforms, one Hertz is equal to one cycle in one second. It is abbreviated Hz so that 100 Hz would be 100 cycles per second. However, the unit m. Used . ay be applied to periodic events other than waveforms like the second hand on a clock, which would cycle at 1 Hz, or a human heart that may beat at 1.2 Hz. Named after the German physicist H. Used . einrich Rudolf Hertz, the name was established in 1930, but did not replace the term cycles per second until the 1970s.

...

Follow Spots

Follow Spots are used in stage lighting in order to project an intense beam of light onto the stage. Often called spot lights, follow spots are usually controlled manually during live performances, by a follow spot operator whose job it is to follow the movements of performers on the stage. Follow spots are used in almost all stage productions and concerts, when it is necessary to highlight one or more individuals at specific times during the show. High-intensity discharge lamps are the preferred light source for most follow spots, although others can be used. To change the color of the spot light that is directed onto the stage, follow spots operators use something known as a color magazine, which is fitted to the follow spot and contains a number of different colored gels. The arrangement of follow spots varies according to the venue. Some venues have follow spots installed on the catwalk, or otherwise in the main control booth or special spot booths. During concerts, the follow spots are often mounted on trusses. These spot booths are installed in strategic places, to the sides, or at the rear of the stage, depending on the coverage requirements, and also other considerations, such as the architecture of the venue.