Buy Used AHS-150 Spot by FutureLight

Contact a Sales Specialist about used AHS-150 Spot for sale.

AHS-150 Spot Moving Lights

...ne operation
Number of scenes in Program Run can be changed individually
The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
8 built-in programs can be called up via DMX-controller
Sound-controlled via built-in microphone
Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-Reverse, Program, Reset, lamp on/off
For bright 150 W discharge lamp
DMX-control via every standard DMX-controller

Technical specifications:

Power Supply:230 V AC, 50 Hz ~
Power consumption:285 W
DMX-control-channels:11
DMX-512-connection:3-pin XLR
Flash-rate:10 Hz
Rotating gobo-wheel:6 gobos and open
Outside diameter of the gobos:27 mm
Image diameter of the gobos:23 mm
Length of base:330 mm
Width of yoke:320 mm
Height (head horizontal):485 mm
Weight (net):13 kg

FutureLight Moving Lights

FutureLight

Moving Light - A moving light truss has a wider opening to accommodate the space required for a moving head light. . Used . . Used . ...

Acoustics - Acoustics is a branch of physics and is the study of sound, mechanical waves in gases, liquids, and solids. A scientist who works in the field of acoustics is an acoustician. The application of acoust. Used . ics in technology is called acoustical engineering. There is often much overlap and interaction between the interests of acousticians and acoustical engineers.

"... acoustics is . Used . characterized by its reliance on combinations of physical principles drawn from other sources; and that the primary task of modern physical acoustics is to effect a fusion of the principles normally adhering t...

Controllers - A hoist or motor controller is a machine for raising and lowering personnel or gear by means of a cable for the purpose of setting the gear in place on a truss or stage.

. Used . . Used . ...

Stage Lighting - Modern stage lighting is a flexible tool in the production of theatre, dance, opera and other performance arts. Several different types of lighting instruments are used in the pursuit of the various p. Used . rinciples or goals of lighting. . Used . ...

Adaptor - A connector allowing more than 2 electrical devices to be connected to a single power source. These connections are normally in parallel (each device is given the same voltage levels), but current is . Used . divided between them. Also known as a "Twofer".

3-way splitters are known as "Threefers".. Used . ...

Moving Lights

Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting. Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator. Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators. Moving lights are hooked up to a lighting control console and send data to it in one of three ways – through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard). So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the “personality” of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them “live”, if they have the experience to do so.