Buy Used by

Contact a Sales Specialist about used for sale.

Stairs - Stairs are used to access the stage and raised parts of the stage. They are usually collapsable for the purposes of storage and transportation. . Used . . Used . ...

Volt - A unit in the international system representing the electric potential and electromotive force equal to the difference of electric potential between two points on a conducting wire carrying a constant. Used . current of one ampere when the power dissipated between the points is one watt. Named after Alessandro Volta for his work with batteries, the term was adopted in the 1880s and is still in u. Used . se today....

Backline - Backline is equipment that is located behind a live band while they are performing. Such examples of backline include amps for guitars and basses. It is the equipment that the band needs aside from . Used . the actual instruments that they are holding and using and the PA and FOH desks.

. Used . ...

Stepper Motor - A stepper motor is a type of electric motor that is used when something has to be positioned very precisely or rotated by an exact angle.

In a stepper motor, an internal rotor containing. Used . permanent magnets is controlled by a set of stationary electromagnets that are switched electronically. Hence, it is a cross between a DC electric motor and a solenoid. Stepper motors do not. Used . use brushes and commutators.

Stepper motors have a fixed number of magnetic poles that determine the number of steps per revolution. Most common stepper motors have 200 full steps/revolution, mea

Preset Boards - Preset boards are the most basic lighting consoles - and also the most prevalent in smaller installations. They consist of two identical fader banks, called 'scenes.' The faders (control slides) on th. Used . ese scenes can be manually adjusted. Each scene has the same number of channels which control the same dimmers, but only one is live at a time, so the console operator can build a scene, then. Used . fade to it. These scenes are often referred to as A-scenes and B-scenes, and a cross-fader is used to fade between the A and B scene.

Generally, a preset board operator has a cue sheet for each s...