Buy Used by

Contact a Sales Specialist about used for sale.

Control Consoles - Lighting consoles are electronic devices used in lighting design to control multiple lighting and staging devices. They can generally control dimmers and many modern consoles can also control automate. Used . d lighting, fog machines, hazers, and other special effects devices. Lighting consoles communicate with the devices in the lighting system with an electronic control protocol, the most common. Used . of which is DMX-512.
...

Preset Boards - Preset boards are the most basic lighting consoles - and also the most prevalent in smaller installations. They consist of two identical fader banks, called 'scenes.' The faders (control slides) on th. Used . ese scenes can be manually adjusted. Each scene has the same number of channels which control the same dimmers, but only one is live at a time, so the console operator can build a scene, then. Used . fade to it. These scenes are often referred to as A-scenes and B-scenes, and a cross-fader is used to fade between the A and B scene.

Generally, a preset board operator has a cue sheet for each s...

Touring Systems - A touring system is generally a rack unit designed for easy of mobility, set up and repair to be taken on tour and can include lighting, audio and staging equipment. . Used . . Used . ...

Compression and Dynamics - Compression is the reduction of the dynamic range of a sound to avoid unintentional changes and increases in the amplitude. Compression is generally used to make an audio signal sound louder without i. Used . ncreasing its peak amplitude. By compressing or limiting the peak signals, it becomes possible to increase the overall volume of the signal without exceeding the dynamic limits of a device or. Used . medium. This causes quiet sounds to become louder, while louder sounds remain unchanged....

AB - A stereo recording technique. Two microphones of the same make and model are located next to one another in , and point in the same direction. The left mic is panned hard left on the mixer. The right. Used . mic is panned hard right.

This technique has flaws, such as audio reflections from each mic which can cause comb filtering (narrow coverage). This can be somewhat corrected by s. Used . pacing the mics out, but this will not fully correct the problem and can lead to muddy sound from delay artifacts.