Buy Used Stage Light 300 AE by Clay Paky

Contact a Sales Specialist about used Stage Light 300 AE for sale.

Stage Light 300 AE Moving Lights

Stage Light 300 AE is a 300W moving body effects projector packed with a range of top level features that make it the most advanced fixture in its category for theatre, television and service applications and also in the world of discotheques.

Clay Paky Moving Lights

Manufacturer of moving lights, effects, and image projectors.

Memory Consoles - Memory-based consoles have become very popular in almost all larger installations, particularly theatres. These new types of controls have completely replaced preset consoles as controllers of choice. Used . . Memory consoles are preferable in productions where scenes do not change from show to show, such as a theatre production, because scenes are designed and digitally recorded, so there is les. Used . s room for human error, and less manpower is required to produce the same result.

Memory consoles have a bank of faders called 'submasters.' These submasters can be programmed to control a single

8-Bit DMX - A value or parameter using one DMX channel for control.. Used . . Used . ...

Scanner - A common term for a moving mirror stage/concert light. This light in particular is common is clubs, discos and lounges. As opposed to the moving head lights that are more common for theatre, concerts. Used . and stage events. . Used .

Delay - Delay is an audio effect which records a signal or sound and then plays it back after a period of time. The delayed signal may be played back multiple times or looped back into the recording again to . Used . create the sound of a repeating decaying echo. Unlike reverb, which uses reflected sound to produce many echos, delay has greater control over the number of times the sound is echoed. . Used . ...

Over 10000 Lumens - A projector that produces over 10000 lumens of light.. Used . . Used . ...

Moving Lights

Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting. Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator. Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators. Moving lights are hooked up to a lighting control console and send data to it in one of three ways – through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard). So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the “personality” of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them “live”, if they have the experience to do so.