Buy Used by

Contact a Sales Specialist about used for sale.

Pattern - Pattern refers to the shape, quality and evenness of a lamp's output. The pattern of light an instrument makes is largely determined by three factors. The first are the specifics of the bulb, reflecto. Used . r and lens assembly. Different mounting positions for the bulb (axial, base up, base down), different sizes and shapes of reflector and the nature of the lens (or lenses) being used can all a. Used . ffect the pattern of light. Secondly, the specifics of how the lamp is focused affect its pattern. In Ellipsoidal Reflector Spotlights (ERS) and their derivatives (see below), there are two beams of light emit...

Automated Light - Automated Lights were originally used in 1972, but the first computer-controlled stage lighting fixtures began to gain widespread acceptance in the concert industry in the early 1980's. As the digital. Used . age progressed, the cost of these fixtures was reduced and they slowly started being used in more 'traditional' theatrical environments. Intelligent fixtures are currently used in almost all. Used . major theatrical productions.

Usually relying on compact arc lamps as a light source, these fixtures generally use stepper motors connected to varying internal devices to manipulate the light bef...

Fog - A fogger is a device that emits a dense vapor that appears similar to fog or smoke,
usually by the vaporization of a water and glycol based or glycerine based fluid. A hazer or diffusion fogger. Used . is used to produce an atmospheric haze, rather than clouds of smoke, and is used by many lighting designers to reveal airborne light beams, especially lazers. . Used . ...

Subs - A sub or subwoofer is a speaker dedicated to the reproduction of bass frequencies, usually from about 20 Hz to about 200 Hz. . Used . . Used . ...

Cue - Generally, a lighting board operator has a cue sheet for each scene, which is a diagram of the board with the faders in their positions as determined by the lighting designer. The operator sets the fa. Used . ders into their positions based on the cue sheets. Typically during a cue, the operator sets the next scene. Then, the operator makes the transition between the scenes using the cross-fader.. Used . ...