Buy Used by

Contact a Sales Specialist about used for sale.

Lumen - In physics, specifically photometry (optics), the lumen (symbol: lm) is the SI derived unit of luminous flux. It is the amount of light that falls on a unit spherical area at unit distance from a sour. Used . ce of one candela. In steradians this is equivalent to the amount of light that falls on a unit solid angle from a light source of one candela. Alternatively, one lumen is the total light pro. Used . duced by an isotropic light source of (1/4p) candelas. A 100 watt incandescent light bulb will output around 1500 lumens. ...

Subs - A sub or subwoofer is a speaker dedicated to the reproduction of bass frequencies, usually from about 20 Hz to about 200 Hz. . Used . . Used . ...

Discharge Lamp - A high powered light source produced by an arcing electrical discharge between two electrodes suspended in a glass tube filled with gas, usually high or low pressure sodium gas, xenon, mercury vapor, . Used . or metal halide. This type of illumination is limited to applications such as followspots and projection, where dimming is accomplished by mechanical instruments. Many newer generation mov. Used . ing lights use discharge lamps, dichroic filters and mechanical dimming shutters....

Patch Bays - A patch bay is a panel, usually rack mounted, that uses cable connections to allow technicians to quickly change the physical path of a select signal. Generally, shorter patch cables will plug into fr. Used . ont of the panel, while the back will have have much longer connections to more permanent cables and equipment. . Used . ...

Preset Boards - Preset boards are the most basic lighting consoles - and also the most prevalent in smaller installations. They consist of two identical fader banks, called 'scenes.' The faders (control slides) on th. Used . ese scenes can be manually adjusted. Each scene has the same number of channels which control the same dimmers, but only one is live at a time, so the console operator can build a scene, then. Used . fade to it. These scenes are often referred to as A-scenes and B-scenes, and a cross-fader is used to fade between the A and B scene.

Generally, a preset board operator has a cue sheet for each s...