2254/R

No company information available.

. Used . . Used .

Xenon Lamp - A type of discharge lamp with high output generally used in Strobe lights and flashes, though sometimes found in some followspots. These lamps utilize an internal electrical discharge passed between . Used . electrodes suspended in xenon gas. Xenon lamps have a color temperature of between 5600 - 6500°K and produce extremely intense, incoherent, full-spectrum white light usually for very short d. Used . urations. ...

Protocol - In computing, a protocol is a convention or standard that controls or enables the connection, communication, and data transfer between two computing endpoints. In its simplest form, a protocol can be . Used . defined as the rules governing the syntax, semantics, and synchronization of communication. Protocols may be implemented by hardware, software, or a combination of the two. At the lowest leve. Used . l, a protocol defines the behavior of a hardware connection.

Protocols should be distinguished from technical standards, which variously specify how to build a computer or related hardware device,...

WYSIWYG - Acronym for "What You See Is What You Get," that is used in computing to describe a system where the content during editing appears very similar to the final product. Often employed in the context of . Used . software tools for lighting design and production administration or applied to TTL (through the lens) camera systems where the viewfinders have 100% film frame coverage. WYSIWYG lighting sof. Used . tware usually has fantastic 3D rendering of lighting states and direct connections to lighting consoles, enabling accurate visualisation of lighting designs. WYSIWYGs significantly increase the connection b...

Windshield - Foam cover for microphones that reduces the interferance caused by wind and breath allowing the microphone to pick up the desired sounds.. Used . . Used . ...

Arc Lamp - An arc lamp is a device that produces light by the sparking (or arcing, from voltaic arc or electric arc) of a high current between two carbon rod electrodes. The rods are touched and then slowly draw. Used . n apart; as the rods separate the current is "struck" and arcs across the gap in a bright, ionized path. The arc produces a temperature of several thousand degrees, and the tips of the carbon. Used . rods are heated to incandescence, creating light. The rods are slowly vaporized during the process and need to be regularly adjusted to maintain the arc. The concept was first demonstrated by Sir Humphry Davy...