Buy Used JM-1P by Meyer Sound

Contact a Sales Specialist about used JM-1P for sale.

JM-1P Line Array Speakers

Meyer Sound Line Array Speakers

Established by John and Helen Meyer in 1979, Meyer Sound has been at the forefront of innovation in audio engineering for over two decades. From the outset, Meyer Sound looked beyond loudspeaker cabinet design to create totally integrated, systems-comprehensive solutions that encompass transducer design, signal processing, power amplification and even electroacoustic measurement systems. As a result, Meyer Sound's engineering teams have earned an enviable reputation for developing unique, innovative solutions to some of the most difficult problems confronting audio professionals. In fact, it is fundamental to John Meyer's philosophy that no component of a system should be compromised in order to compensate for variables "upstream" or "downstream." Instead, the entire system should be conceived, designed, tested, confirmed and manufactured as a whole to provide the optimum blend of audio fidelity, utility and long-term reliability.

Acoustics - Acoustics is a branch of physics and is the study of sound, mechanical waves in gases, liquids, and solids. A scientist who works in the field of acoustics is an acoustician. The application of acoust. Used . ics in technology is called acoustical engineering. There is often much overlap and interaction between the interests of acousticians and acoustical engineers.

"... acoustics is . Used . characterized by its reliance on combinations of physical principles drawn from other sources; and that the primary task of modern physical acoustics is to effect a fusion of the principles normally adhering t...

AB - A stereo recording technique. Two microphones of the same make and model are located next to one another in , and point in the same direction. The left mic is panned hard left on the mixer. The right. Used . mic is panned hard right.

This technique has flaws, such as audio reflections from each mic which can cause comb filtering (narrow coverage). This can be somewhat corrected by s. Used . pacing the mics out, but this will not fully correct the problem and can lead to muddy sound from delay artifacts.

Stairs - Stairs are used to access the stage and raised parts of the stage. They are usually collapsable for the purposes of storage and transportation. . Used . . Used . ...

Full Racks - Dimmer racks are cabinets designed for stacking many dimmer modules into an easily accessible space. They can be permanent architectural installments or portable units built for road travel and vary i. Used . n size from small rack with only a few dimmer modules to very large racks with hundreds. . Used . ...

XGA - Extended Graphics Array is a standard computer display introduced in 1990 by IBM. The initial version of XGA built upon IBM's VGA, adding support for two resolutions, 800 × 600 pixels with high color . Used . and 1024 × 768 pixels with a palette of 256 colors. XGA-2 was developed later and with 1024 x 768 pixels with high color, and 1360 x 1024 with 16 colors. However, all XGA modes have an aspe. Used . ct ratio 4:3 rounded to 8 pixels....

Line Array Speakers

Line array speakers make up a loudspeaker system to create a sound source that produces an evenly distributed sound output. The driver of each line array element is close enough to the driver of the next element to create constructive interference. The resulting sound waves go farther than sound waves from traditional loudspeakers. Line array systems date back to the early days of research in acoustics. Many old town halls and public venues still have old line source boxes which were found to project voice well though they are much smaller than horn-loaded speakers. These days, line array speakers use different drivers for high-, mid- and low-frequency passbands that must be in line. Each enclosure must be set up closely to form columns composed of these drivers. To increase the frequency range and maximum sound pressure, the number of drivers per enclosure must be increased. The orientation of line array speakers may vary. Vertical arrays are excellent for focusing sound at audiences without wasting output energy on ceilings or empty air above the audience because of its very narrow vertical output with a normally-wide horizontal pattern. On the other hand, horizontal line arrays have a very narrow horizontal output with a tall vertical pattern. For hanging concert speakers which are usually part of a concert reinforcement system, enclosures are set up together using a specialized rigging hardware and they hang from a single point. These line array speakers are curved backward at the lower portion so that the sound will reach more audience.