Buy Used Hog 600 by Jands

Contact a Sales Specialist about used Hog 600 for sale.

Hog 600 Lighting Consoles

...ration of the desk makes programming easy
* Six menu banks of palette buttons give instant access to
Macros, Pages, Beam, Colour, Position and Groups of fixtures
* LCDs provide continuous feedback on programming and playback
status together with cue or palette lists
* Instant access to console features

Jands Lighting Consoles

Jands have been designing, building and operating lighting equipment since we made our first dimmer in 1970. Since then, our products have become a standard feature of lighting rigs the world over. Whatever country you’re in, ask an industry professional about Jands products and you’ll get the same response: ‘reliable, good value, solid and dependable, go-anywhere do-anything, noise-free, just better.’ But we don’t just offer our own lighting equipment, we’ve also identified the best products available from other manufacturers. This is why we can give you the best possible lighting solution, including ETC and Varilite products.

Laser - LASER is acronym for Light Amplified by Stimulated Emission of Radiation and is an optical source that emits photons in a coherent concentrated beam. There are many different kinds of LASERs producing. Used . many different colors, but red is the most common.. Used . ...

Adaptor - A connector allowing more than 2 electrical devices to be connected to a single power source. These connections are normally in parallel (each device is given the same voltage levels), but current is . Used . divided between them. Also known as a "Twofer".

3-way splitters are known as "Threefers".. Used . ...

Hoist - A hoist is a device used for lifting or lowering a load by means of a drum or barrel around which rope or chain wraps. It may be manually operated, electrically or pneumatically driven and may use cha. Used . in, fiber or wire rope as its lifting medium.

A hoist normally is used for lifting (near vertical) and a winch is normally used for pulling (near horizontal).
. Used . ...

Wavelength - The distance from one point, usually the crest, on a vibrating wave to the same point on the next wave. The shorter the wavelength the higher the frequency and the more directional the wave and vice . Used . versa. Commonly designated by the Greek letter lambda (?), wavelengths are usually measured in Angstroms.. Used . ...

A1 - A1 is Lighting Industry Forum code for lamps that are origianally recommended for projection.

Here are all the codes:

CP: Film, Television &Photographic studio (3200K)
. Used . A1: Projection
T: Theatre (3000K)
P2: Photoflood (3200K)
K: General Purpose Flood Lighting (2850K) . Used . ...

Lighting Consoles

Lighting consoles are electronic devices for controlling multiple lights simultaneously from one point. Dimmers for controlling lighting intensity, automated lighting, fog machines and hazers are some of the special effects lighting devices controlled by a lighting board or lighting desk (other terms for lighting consoles). An electronic control protocol is used by lighting consoles to communicate with other devices in the lighting system. Some of these are DMX512, ACN and DMX-512-A. New protocols are being introduced as more sophisticated lighting systems become available. In the entertainment industry, where theatrical lighting design is mostly used, lighting consoles are usually found in the control booth, auditorium or the foyer. For this application, the most common protocol is DMX512. Lighting consoles are available in different sizes and complexities. A preset board, a conventional console for basic lighting systems, is used mostly for small setups. However, DJs may complement it with more advanced hybrid consoles. A moving light controller works with dimmers for controlling ordinary lighting. It also provides additional controls for automated stage lighting (also called intelligent lighting) to produce very complex lighting effects. Other types of lighting consoles include memory consoles, personal-control based controllers, and remote focus unit. The light board operator (also called the light op or board op) is the person who operates the lighting console. Depending on the scale and type of production, he can be the lighting designer or the stage manager. He or she is responsible for conventional or automated lighting fixtures as well as controlling video.