Buy Used J12 by DB Audiotechnik

Contact a Sales Specialist about used J12 for sale.

J12 Line Array Speakers

...e. Due to the dipolar arrangement of the neodymium LF drivers the exceptional 120deg horizontal constant directivity dispersion control is nominally maintained down to 250 Hz. The J12 is acoustically and mechanically compatible to the J8 loudspeaker. It can be used in columns of purely J12 loudspeakers or combined with J8s and / or with J-SUBs. The J12 cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill, the side and rear panels incorporate four handles, and two EP5 or NL8 connectors wired in parallel are also mounted at the rear.


Amplifiers
The J12 can only be driven by d&b's D12 dual channel amplifier configured for the J12. More detailed information on specific loudspeaker setups with the D12 amplifier is available either in the relevant loudspeaker or D12 manual.

DB Audiotechnik Line Array Speakers

d&b audiotechnik has been developing, manufacturing and distributing loudspeaker systems since 1981. The company operates internationally in the field of electroacoustics to produce high quality products for reinforcement of speech and music. Through the amalgamation of technological developments, system integration principals, quality of construction and standards of service, d&b pursues a systems approach that includes all aspects of design, development, manufacture and support. d&b's loudspeakers are used globally in rental and installation markets for events, multimedia, musicals, concert halls, theatres, opera houses, broadcast and everything from the smallest conference room to the largest stadium.

Bump Button - A lighting console button that performs on action when pressed and another when released. This is a lighting console term.. Used . . Used . ...

Motor - A hoist is a device used for lifting or lowering a load by means of a drum or barrel around which rope or chain wraps. It may be manually operated, electrically or pneumatically driven and may use ch. Used . ain, fiber or wire rope as its lifting medium.

A hoist normally is used for lifting (near vertical) and a winch is normally used for pulling (near horizontal). . Used .

Absorption - A surfaces ability to absorb sound. Absorption is rated from 0 to 1.

Full absoption is 1. Full reflection is 0. . Used . . Used .

Zirconium Lamp - A high intensity point source arc lamp using a zirconium oxide cathode in an argon-filled bulb. Used in powerful projectors because of its low emanation of long-wavelength light and its concentrated . Used . source. Similar to the Drummond light or Limelight, but differing from them chiefly in the employment of cones of zirconium instead of cylinders of lime. It has been outdated and replaced b. Used . y electric lighting....

Audio - Audio is the science and art of recording or reproducing sound through mechanical or electronic means. The field includes many disciplines, such as electrical engineering, acoustics, and music with de. Used . sign, installation and operation of sound recording and reproduction equipment as the focus. . Used . ...

Line Array Speakers

Line array speakers make up a loudspeaker system to create a sound source that produces an evenly distributed sound output. The driver of each line array element is close enough to the driver of the next element to create constructive interference. The resulting sound waves go farther than sound waves from traditional loudspeakers. Line array systems date back to the early days of research in acoustics. Many old town halls and public venues still have old line source boxes which were found to project voice well though they are much smaller than horn-loaded speakers. These days, line array speakers use different drivers for high-, mid- and low-frequency passbands that must be in line. Each enclosure must be set up closely to form columns composed of these drivers. To increase the frequency range and maximum sound pressure, the number of drivers per enclosure must be increased. The orientation of line array speakers may vary. Vertical arrays are excellent for focusing sound at audiences without wasting output energy on ceilings or empty air above the audience because of its very narrow vertical output with a normally-wide horizontal pattern. On the other hand, horizontal line arrays have a very narrow horizontal output with a tall vertical pattern. For hanging concert speakers which are usually part of a concert reinforcement system, enclosures are set up together using a specialized rigging hardware and they hang from a single point. These line array speakers are curved backward at the lower portion so that the sound will reach more audience.