Buy Used i Series Quad Dimmer Module by Colortran Leviton

Contact a Sales Specialist about used i Series Quad Dimmer Module for sale.

i Series Quad Dimmer Module Dimmer Rack Modules

The i Series Quad Dimmer Module is designed to Operate on voltages ranging from 90-140VAC (120v nominal) or 198-264VAC (230v nominal) at 47/63 Hz.

Colortran Leviton Dimmer Rack Modules

Commercial Entertainment / Theatrical / NSI Leviton's NSI products transformed the way the world thinks about lighting controls. Our control systems are designed to unlock your vision and creativity, giving you the power to animate your lighting like never before. And when you consider their versatility and technological advances, our controllers, dimmers and fixtures are remarkably affordable. Colortran Division, Leviton Manufacturing Company

Circular - A circular truss is a truss that is shaped like a circle and generally used in large open venues where the stage can be viewed from many angles.. Used . . Used . ...

Zoetrope - Early device for creating the illusion of continuous motion. A sequence of still pictures was viewed rapidly through slits in a rotating drum so that the images appeared to merge. . Used . . Used . ...

Moving Heads - A moving head is an intelligent light mounted on a moving yoke and generally remotely controlled by a lighting control console or preprogrammed to perform a large variety of effects and operations. A . Used . single moving head luminary can replace the functions of many conventional lights and can often perform tasks conventional lights can not. Most modern moving head luminaries utilize DMX-512 s. Used . ignals for control, but some can be controlled by way of analog signals as well.

...

Conventional - Conventional lighting is made up of stationary lights that can be moved, but only via manual means of adjusting, or focusing the fixture with a yoke. However, some aspects of the lights, like brightne. Used . ss and color may be controlled remotely
by consoles or analog audio inputs. There are many different conventional lights used in stage lighting design including floodlights, pars, foll. Used . owspots, ellipsoidals, fresnels, strips and cycs. ...

Conventional Lighting - Conventional lighting is made up of stationary lights that can be moved, but only via manual means of adjusting, or focusing the fixture with a yoke.. Used . . Used . ...

Dimmer Rack Modules

A dimmer rack module is a small device that is used in professional lighting to adjust the brightness of a light fixture. It works by altering the voltage of electricity that is delivered to the lamp. When the dimmer rack module reduces this power, the brightness of the lamp will fade down (become dimmer). Alternatively, if the dimmer rack module increased the power, the lamp will fade up (become brighter). Interestingly enough, a dimmer rack module allows for minor color control as well. Although large dimmer racks are sometimes used, these are often replaced with a dimmer rack module, which is smaller and contains a 20 to 50 ampere breaker. The advantage of a dimmer rack module is that it can also supply current to other devices, such as foggers and hazers, or lifting equipment. This is important as these other devices can be damaged if you fail to use a dimmer rack module on non-dimming electrical devices. The circuit to which a dimmer rack module is connected to will be constantly energized, thus protecting these other devices. Even in cases where it is thought that a regular dimmer rack will always be operating at full power, it can be dangerous for non-dimming devices due to interruptions in the data stream caused by DMX signals and noise interference, which would lead to the dimmer dimming the circuit.