Buy Used Tiger Scan 575 by Clay Paky

Contact a Sales Specialist about used Tiger Scan 575 for sale.

Tiger Scan 575 Moving Mirror Scanners

Clay Paky Moving Mirror Scanners

Manufacturer of moving lights, effects, and image projectors.

Ampere - The ampere (symbol: A) is the SI base unit of electrical current equal to one coulomb per second. It is named after André-Marie Ampère, one of the main discoverers of electromagnetism.

Th. Used . e ampere is that constant current which, if maintained in two straight parallel conductors of infinite length, of negligible circular cross-section, and placed 1 metre apart in vacuum, would . Used . produce between these conductors a force equal to 2×10–7 newton per metre of length....

Conventional Lighting - Conventional lighting is made up of stationary lights that can be moved, but only via manual means of adjusting, or focusing the fixture with a yoke.. Used . . Used . ...

Windshield - Foam cover for microphones that reduces the interferance caused by wind and breath allowing the microphone to pick up the desired sounds.. Used . . Used . ...

Xenon Lamp - A type of discharge lamp with high output generally used in Strobe lights and flashes, though sometimes found in some followspots. These lamps utilize an internal electrical discharge passed between . Used . electrodes suspended in xenon gas. Xenon lamps have a color temperature of between 5600 - 6500°K and produce extremely intense, incoherent, full-spectrum white light usually for very short d. Used . urations. ...

Color Changers - A conventional lighting fixture with a remotely controlled colored changeable filter over the lens. There are three kinds of mechanisms used in color changers, a wheel with lens sized holes into which. Used . colored gells can be placed, multiple fixed filters that can be moved in and out of the beam to mix the colors and a scroller which uses continuous, usually dichroic, filters to mix an even . Used . greater number of colors.



...

Moving Mirror Scanners

Moving Mirror Scanners are often used for club lighting, as well as for stage lighting, and are quite similar in concept to moving lights in that they offer increased versatility and can be used to create more complex special effects than conventional stage lights. Scanners have actually been around for years â?? indeed, they were the first ever kind of moving lights, preceding the more popular intelligent lights that are now used today. The main different between moving mirror light scanners is that, unlike more modern moving lights that have mechanical light fixtures, scanners rely on â??mirrors that moveâ?� to direct the light beam, rather than moving light components. The fixture of the scanning head light doesnâ??t actually move by itself. Rather, it contains a built in mirror fixed to a pivot point that moves around and directs the beam of light which is focused onto it. Much like a moving lights, scanners or club lighting can be pre-programmed before a production so that the operator doesnâ??t have to control the light through the duration of the show, though of course some skilled operators prefer to operate the lights manually, during the performance, if they have the experience to do so. Scanners are available in a wide range of different sizes, and offer many different types of features to lighting technicians. Features include high-resolution stepping, high-resolution glass gobos with indexing and rotation, color mixing, mechanical dimming, remote focus, electronic strobing and many more.