Buy Used Alpha Beam 1500 by Clay Paky

Contact a Sales Specialist about used Alpha Beam 1500 for sale.

Alpha Beam 1500 Moving Lights

...w special Clay Paky optical group, it produces a much greater brightness than lights of the same power, achieving projection distances reached only by lights of thousands of watts, but with the energy consumption of a 1500 W light bulb. This enables it to be used instead of considerably larger projectors, with enormous savings in energy.

Much more than a Beam moving light
Alpha Beam 1500 has the widest effect section and can be used both as a Moving Beam and a Spot thanks to the 14 gobos (6 rotating and 8 fixed), Focusing, 2 rotating prisms, CMY + color wheel, rotating beam Shaper, Dimmer + precision dimmer on separate channels, mechanical iris. It also offers 3 combinable linear frosts on dedicated channels.

Clay Paky Moving Lights

Manufacturer of moving lights, effects, and image projectors.

Amplitude - Amplitude is a nonnegative scalar measure of a wave's magnitude of oscillation, that is, magnitude of the maximum disturbance in the medium during one wave cycle.

Sometimes this distance . Used . is called the "peak amplitude", distinguishing it from another concept of amplitude, used especially in electrical engineering: the root mean square (RMS) amplitude, defined as the square roo. Used . t of the temporal mean of the square of the vertical distance of this graph from the horizontal axis. The use of peak amplitude is unambiguous for symmetric, periodic waves, like a sine wave, a square wave, or...

Controllers - A hoist or motor controller is a machine for raising and lowering personnel or gear by means of a cable for the purpose of setting the gear in place on a truss or stage.

. Used . . Used . ...

Address - In computer science, a memory address is a unique identifier for a memory location at which a CPU or other device can store a piece of data for later retrieval. In modern byte-addressable computers, e. Used . ach address identifies a single byte of storage; data too large to be stored in a single byte may reside in multiple bytes occupying a sequence of consecutive addresses. Some microprocessors . Used . were designed to be word-addressable, so that the typical storage unit was actually larger than a byte. Examples include the Texas Instruments TMS9900 and the National Semiconductor IMP-16, both of which used ...

Pattern - Pattern refers to the shape, quality and evenness of a lamp's output. The pattern of light an instrument makes is largely determined by three factors. The first are the specifics of the bulb, reflecto. Used . r and lens assembly. Different mounting positions for the bulb (axial, base up, base down), different sizes and shapes of reflector and the nature of the lens (or lenses) being used can all a. Used . ffect the pattern of light. Secondly, the specifics of how the lamp is focused affect its pattern. In Ellipsoidal Reflector Spotlights (ERS) and their derivatives (see below), there are two beams of light emit...

Entire Stages - An entire stage is a complete stage that generally include platforms, stairs and sometimes roofing, ranging in size from small easy to transport stages to large staging systems.. Used . . Used . ...

Moving Lights

Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting. Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator. Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators. Moving lights are hooked up to a lighting control console and send data to it in one of three ways – through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard). So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the “personality” of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them “live”, if they have the experience to do so.