Buy Used GL3300 by Allen and Heath

Contact a Sales Specialist about used GL3300 for sale.

GL3300 Audio Mixers

...console. With the press of a few switches it's a thoroughbred monitor mixer with 8 aux mixes on 100mM Faders. How's that for bang for your buck?

Allen and Heath Audio Mixers

We've built a lot of mixers in the last 35 years or so (over 160,000 at the last count) and we still get a huge buzz out of doing it well. It's an unbeatable feeling to know that at any time of day or night, right across the globe, there is an Allen & Heath mixer out there working hard, sounding great and making life a little easier for the guy at the controls.

Full Racks - Dimmer racks are cabinets designed for stacking many dimmer modules into an easily accessible space. They can be permanent architectural installments or portable units built for road travel and vary i. Used . n size from small rack with only a few dimmer modules to very large racks with hundreds. . Used . ...

Motor - A hoist is a device used for lifting or lowering a load by means of a drum or barrel around which rope or chain wraps. It may be manually operated, electrically or pneumatically driven and may use ch. Used . ain, fiber or wire rope as its lifting medium.

A hoist normally is used for lifting (near vertical) and a winch is normally used for pulling (near horizontal). . Used .

Acoustics - Acoustics is a branch of physics and is the study of sound, mechanical waves in gases, liquids, and solids. A scientist who works in the field of acoustics is an acoustician. The application of acoust. Used . ics in technology is called acoustical engineering. There is often much overlap and interaction between the interests of acousticians and acoustical engineers.

"... acoustics is . Used . characterized by its reliance on combinations of physical principles drawn from other sources; and that the primary task of modern physical acoustics is to effect a fusion of the principles normally adhering t...

Compression and Dynamics - Compression is the reduction of the dynamic range of a sound to avoid unintentional changes and increases in the amplitude. Compression is generally used to make an audio signal sound louder without i. Used . ncreasing its peak amplitude. By compressing or limiting the peak signals, it becomes possible to increase the overall volume of the signal without exceeding the dynamic limits of a device or. Used . medium. This causes quiet sounds to become louder, while louder sounds remain unchanged....

Dimmers and Distro - Dimmers are devices used to vary the brightness of a light or stage light and are usually controlled remotely by a lighting console or controller by way of a protocol that is usually DMX. A Distro is . Used . a device that distributes power to many devices.. Used . ...

Audio Mixers

Audio mixers, or sound consoles, are electronic sound mixing boards used to combine two or more audio signals, before directing them to the output channels connected to the device. Sound consoles do a great deal more than just combining different audio signals – they allow users to optimize the sound output in a number of ways – adjusting various sound levels, enhancing sound with special effects and equalization etc, allowing for unmatched control over the end product. When there is a need for high quality sound control and output, audio mixers are an essential item for audio team. Mixing desks are used on stage in live concerts to combine the sound input from various musical instruments in to a stereo master mix. For TV and movie studios, sound consoles are essential to combine the various sounds from the numerous different microphones that will be used. Audio mixers are available in a wide range of different shapes, sizes and designs, beginning with smaller units designed for portability, right up to the enormous sound consoles used in recording studios. The term audio mixer actually refers to any kind of sound mixing board, whereas a sound console is usually a device which sits permanently on a desk. Technicians usually differentiate audio mixers according to how many channels they have. Fairly standard in the recording industry is the 12-channel mixer, in which you can hook up a total of 12 input sources. Sound consoles can also be more specified – for example, a 24 x 4 x 2 mixer has 24 inputs, 4 sub-group channels and 2 output channels.