Buy Used Ls by Abstract AVR

Contact a Sales Specialist about used Ls for sale.

Ls Indoor Architectural Lighting

Ls led strip are available in 4 standard lengths 300 / 600 / 900 and 1200 mm. To be used for back lighting to illuminate panels / bar fronts / bar backs etc. R/G/B colour mixing is achieved by mixing the primary colours to create hundreds of colours, hues and shades of colour. Each output of the electronic driver module will power up to 1200 mm of led Ls strips. The Ls strip comes complete with 1.5 meters of Cat 5 cable fitted with an Rj45 connector for ease of installation.

Abstract AVR Indoor Architectural Lighting

Control Consoles - Lighting consoles are electronic devices used in lighting design to control multiple lighting and staging devices. They can generally control dimmers and many modern consoles can also control automate. Used . d lighting, fog machines, hazers, and other special effects devices. Lighting consoles communicate with the devices in the lighting system with an electronic control protocol, the most common. Used . of which is DMX-512.
...

Color Changers - A conventional lighting fixture with a remotely controlled colored changeable filter over the lens. There are three kinds of mechanisms used in color changers, a wheel with lens sized holes into which. Used . colored gells can be placed, multiple fixed filters that can be moved in and out of the beam to mix the colors and a scroller which uses continuous, usually dichroic, filters to mix an even . Used . greater number of colors.



...

Auxiliary Output - A seperate line level output from a sound console that is to be used for foldback or monitoring that does not use up another main output. Each in channel has a path to the Auxiliary bus. It is also . Used . useful to send a signal to a separate effects processor.
. Used . ...

Stepper Motor - A stepper motor is a type of electric motor that is used when something has to be positioned very precisely or rotated by an exact angle.

In a stepper motor, an internal rotor containing. Used . permanent magnets is controlled by a set of stationary electromagnets that are switched electronically. Hence, it is a cross between a DC electric motor and a solenoid. Stepper motors do not. Used . use brushes and commutators.

Stepper motors have a fixed number of magnetic poles that determine the number of steps per revolution. Most common stepper motors have 200 full steps/revolution, mea

Cabinets - A cabinet is a loudspeaker enclosure designed to prevent sound waves from the rear of the speaker combining with the sound waves from the front of the speaker creating
interference that would c. Used . ause the efficiency of the speaker to be compromised.. Used . ...

Indoor Architectural Lighting

Indoor architectural lighting is seen by its proponents as something of an art, as well as a science. Also called architectural lighting design, indoor architectural lighting is about carefully balancing the requirements of light in a building with the building’s aesthetics, and also the cost and energy efficiency of the indoor architectural lighting system. For example, in indoor hotel lighting or indoor museum lighting, it’s possible to analyze how much daylight the internal spaces of the building receive, using something called the Daylight Factor to calculate this. These calculations can be based on tabular data in smaller, simpler buildings, and then applied to its indoor architectural lighting design. However, if a specialist indoor architectural lighting design is required for indoor building lighting, then it’s better to use software programs or mathematical models to calculate the optimum amount of light that will be needed for the most aesthetically pleasing effect. Many types of lighting equipment can be used in indoor architectural lighting. One of the newest, but still not widespread is indoor LED lighting, which is slowly gaining popularity for its low cost and high energy efficiency. For now, LED lighting is not standard in indoor architectural lighting, as more conventional lighting systems are preferred. Indoor architectural lighting is often unique to each building, as a buildings furniture and the color of its walls and ceilings (and the materials) all effect the lighting. Rooms with walls and ceilings that are painted in dark colors, or have dark colored wall paper, seem to absorb the light more readily than light colored rooms, and so the light in the room will appear dimmer than it actually is. It also has the effect of making the room looks smaller in some circumstances. Indoor architectural lighting designers also need to take care of certain reflective surfaces in a room, such as its furnishings, which can cause undesired glare if they are too reflective.